Aerial lifts Leasing

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.

Maximize Your Downhole Success with HOCA Oil Tools' Running Tools for Lock Mandrels In the complex world of downhole operations, the necessity for precision, safety, and efficiency cannot be overstated. HOCA Oil Tools, a leader in providing advanced downhole slick line tools, introduces a range of Running Tools specifically designed for Lock Mandrels, ensuring seamless integration and operation in your wellbore activities. HOCA’s Running Tools for Lock Mandrels: Precision, Versatility, and Reliability Our Running Tools for Lock Mandrels are engineered with precision, crafted to deliver unmatched performance in downhole settings. These tools are essential for setting or positioning downhole flow controls and devices at predetermined depths efficiently and accurately. Designed for versatility, they accommodate various sizes and types of Lock Mandrels, ensuring compatibility and flexibility for different downhole requirements. Experience the HOCA Oil Tools Difference At HOCA Oil Tools, we are committed to providing the oil and gas industry with downhole solutions that set new standards in quality, efficiency, and reliability. Our Running Tools for Lock Mandrels are a testament to this commitment, designed to enhance your downhole operations and drive success. Incorporating our Running Tools into your downhole toolkit not only ensures optimal performance but also aligns your operations with the highest standards of precision and safety. With HOCA Oil Tools, you gain a partner dedicated to supporting your downhole success with innovative solutions and exceptional service. Choose HOCA Oil Tools’ Running Tools for your Lock Mandrels and elevate your downhole operations to new heights. Partner with us and experience the difference that precision engineering, reliability, and dedicated support can make in your wellbore activities. Embrace the future of downhole operations with HOCA Oil Tools – where innovation meets precision and efficiency.

SSG Consulting is a Project, Engineering and Construction Management Consulting firm, specializing in the implementation of Business and Project Management solutions on Mega projects in various industries. - Authorised KEY360 channel partner Our services cover the following: - Project Advisory & Audits - EMPCM Execution - Specialist Project Controls & Forensics - Project Digitalisation - Project Resourcing - Analytics & Dashboarding Our Track Record: - 25 BILLION MANAGED VALUE - 300 MILLION PLATFORM TRANSACTIONS - 80 DEDICATED STAFF - 10X BUSINESS PROCESSES IMPROVEMENT

Unleash the Grasping Power of Your ROV: Introducing Poseidon Robotics' Custom ROV Grabber Jaws At Poseidon Robotics, we believe that no underwater mission is too challenging when you have the right tools at your disposal. That's why we are thrilled to introduce our latest innovation - Custom ROV Grabber Jaws. Designed to enhance the capabilities of your ROV, these specialized jaws are engineered to conquer the depths and tackle a wide range of subsea tasks with ease and precision. Tailored Precision for Your Unique Needs We understand that every subsea operation comes with its own set of requirements and challenges. Our Custom ROV Grabber Jaws are meticulously tailored to address your specific needs, ensuring that your ROV has the perfect gripping solution for any situation. Whether you're involved in search and rescue (SAR) missions, industrial inspections, scientific research, or archaeological explorations, our jaws are built to optimize your ROV's performance. Seamless Integration with Your ROV System Compatibility and ease of integration are vital in the world of subsea robotics. Our Custom ROV Grabber Jaws are designed to seamlessly attach to your existing ROV system, eliminating any hassle during setup and enabling you to get to work quickly. With our precision engineering, the jaws fit perfectly, ensuring a secure and reliable connection, so your ROV can perform flawlessly even in the most demanding environments. Built for Reliability and Durability The harsh conditions of the underwater world demand robust and dependable equipment. Our Custom ROV Grabber Jaws are crafted from high-quality materials, making them corrosion-resistant and capable of withstanding the rigors of subsea missions. Count on Poseidon Robotics' jaws to be your reliable partner, offering consistent performance, mission after mission. Versatile Grasping Solutions No matter the size or shape of the objects you need to handle, our Custom ROV Grabber Jaws are up to the task. From delicate marine samples to heavy equipment retrieval, our jaws are designed for versatility. The advanced engineering ensures that your ROV can grip, hold, and maneuver objects with precision, providing you with the flexibility you need to execute your tasks efficiently. The Poseidon Robotics Advantage As industry leaders in subsea robotics, Poseidon Robotics has a proven track record of delivering cutting-edge solutions to the underwater exploration community. With our Custom ROV Grabber Jaws, we continue to set new standards for innovation, performance, and reliability. Experience the Power of Customization Don't let the limitations of off-the-shelf tools hold back your ROV's potential. Embrace the power of customization with Poseidon Robotics' Custom ROV Grabber Jaws. Our team of experts is ready to collaborate with you, understanding your specific requirements, and crafting the perfect solution that empowers your ROV to achieve extraordinary feats beneath the waves. Upgrade Your ROV Today Discover the limitless possibilities of subsea exploration with Poseidon Robotics' Custom ROV Grabber Jaws. Reach out to us now to explore how our innovative solutions can take your underwater missions to new depths of success. With Poseidon Robotics by your side, there's no limit to what your ROV can accomplish.

ELEKS: Powering the Future of Efficient Energy Distribution Management Harness the power of technology to revolutionize energy distribution management with ELEKS. Our expertise in energy software development brings stability, accessibility, cleanliness, and sustainability to your consumers while ensuring the resilience of your networks against challenges and threats. As a leading energy software company, we're at the forefront of developing and integrating Custom Distribution Management Systems (ADMS) that empower utility suppliers to meet customer demands for power quality, reliability, and data security. Elevate Your Energy Management with ELEKS Energy Software Development: Embrace the future of energy management with our advanced software solutions. Dramatically enhance productivity, accessibility, safety, and sustainability in your business power system. Join the ranks of forward-thinkers who are leveraging technology to redefine the energy landscape. Empowering Energy Producers and Distributors: Customized Solutions for You: As a seasoned custom software development company, ELEKS has been empowering energy producers, distributors, smart city developers, and governmental organizations for three decades. Our expertise lies in crafting tailored data-driven software solutions and energy management systems that leverage cutting-edge technologies such as Cloud, IoT, blockchain, and drones. Unveiling the Future of Energy Management: Understanding Your Needs: We comprehend the intricacies of the energy and utility industry – from modern power management solutions for diverse sources to facilities and businesses. Our journey has been marked by refining our understanding of unique industry challenges and leveraging technology to develop innovative solutions. Why Choose ELEKS? Experience That Matters: With a legacy spanning thirty years, ELEKS brings a wealth of experience to the table. Our team of experts is well-versed in addressing complex energy management challenges. Cutting-Edge Technologies: Our energy software development solutions are fueled by the latest technologies, including Cloud, IoT, blockchain, and more. Stay ahead of the curve and embrace the future with confidence. Empower Efficiency and Sustainability: Energy efficiency and sustainability aren't just buzzwords – they're critical factors in a changing world. ELEKS' solutions empower you to meet these demands head-on. Join the Energy Revolution with ELEKS Revolutionize the energy distribution landscape and empower efficient energy management with ELEKS. Our energy software development solutions are designed to catapult your business into a future of resilience, reliability, and sustainability. Embrace innovation – choose ELEKS to lead the way into a brighter, greener future.

Secure and Optimize Your Downhole Operations with HOCA Oil Tools' Check Set Tool In the intricate world of oil and gas exploration and extraction, securing and optimizing downhole components are pivotal for operational success and safety. HOCA Oil Tools, a leader in downhole slick line tool solutions, presents the Check Set Tool, an innovative product designed to ensure the correct setting and functionality of downhole locks and plugs. This specialized tool is an essential part of maintaining well integrity and efficiency, demonstrating our commitment to providing high-quality, reliable downhole solutions. HOCA’s Check Set Tool: Ensuring Downhole Safety and Efficiency The Check Set Tool by HOCA Oil Tools is engineered with precision, built to verify the accurate setting of lock mandrels and other downhole locking devices. Crafted from robust materials suited for the harsh downhole environment, this tool is designed for reliability and durability, ensuring that your downhole operations run smoothly and securely. Elevate Your Downhole Tool Setting with HOCA Oil Tools At HOCA Oil Tools, we understand the challenges and risks associated with downhole operations. Our Check Set Tool is a reflection of our dedication to innovation, quality, and customer service, offering a solution that addresses the critical need for secure and efficient downhole tool settings. Integrating the HOCA Check Set Tool into your downhole operations not only enhances operational security and efficiency but also demonstrates a commitment to the highest standards of well integrity and safety. Our experienced team is dedicated to supporting your operational success, providing tools and solutions that meet the demanding conditions of the oil and gas industry. Invest in the HOCA Check Set Tool and experience the confidence and efficiency that come with knowing your downhole components are correctly set and secured. Choose HOCA Oil Tools for all your downhole needs and join the ranks of satisfied customers who trust our products to keep their operations running smoothly and safely.

Multifunctional, with intelligent power management The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology, and a high-speed AC transfer switch in a single compact enclosure. Next to these primary functions, the MultiPlus has several advanced features, as outlined below. Two AC Outputs The main output has no-break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore-/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example, can be connected to this output (second output available on models rated at 3kVA and more). Virtually unlimited power thanks to parallel operation Up to six Multis can operate in parallel to achieve higher power output. Six 24/3000/70 units, for example, provide 15kW / 18kVA output power with 420 Amps of charging capacity. Three phase capability In addition to parallel connection, three units can be configured for three-phase output. But that’s not all: with three strings of six parallel units a 45 kW / 54 kVA three phase inverter and 1260 A charger can be built. Split phase options Two units can be stacked to provide 120-0-120 V, and additional units can be paralleled up to a total of 6 units per phase, to supply up to 30 kW / 36 kVA of split phase power. Alternatively, a split phase AC source can be obtained by connecting our autotransformer (see data sheet on www.victronenergy.com) to a ‘European’ inverter programmed to supply 240 V / 60 Hz. PowerControl - Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 20 A per 3 kVA MultiPlus at 120 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist - Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Four stage adaptive charger and dual bank battery charging The main output provides a powerful charge to the battery system by means of advanced ‘adaptive charge’ software. The software fine-tunes the three stage automatic process to suit the condition of the battery, and adds a fourth stage for long periods of float charging. The adaptive charge process is described in more detail on the Phoenix Charger datasheet and on our website, under Technical Information. In addition to this, the MultiPlus will charge a second battery using an independent trickle charge output intended for a main engine or generator starter battery. System configuring has never been easier After installation, the MultiPlus is ready to go. If settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Even parallel and 3-phase operation can be programmed with DIP switches: no computer needed! Alternatively, VE.Net can be used instead of the DIP switches. And sophisticated software (VE.Bus Quick Configure and VE.Bus System Configurator) is available to configure several new, advanced, features. *information from manufacturer catalogue

Introducing Safe-T-Whip™ Continuous RD-XLong 30’-9”: Unmatched Safety and Reliability for Extended Restraint Applications At Safe-T-Whip & Restraints Inc., safety is our unwavering commitment. We are proud to present our latest innovation - the Safe-T-Whip™ Continuous RD-XLong 30’-9”. Designed for extended restraint applications, this safety whip offers unparalleled protection and reliability for pressurized pipe fittings in the oilfield. Unmatched Safety Restraint System: The Safe-T-Whip™ Continuous RD-XLong 30’-9” is a safety restraint system specially designed to contain uncontrolled movement on both sides of a pipe union during sudden and total failure. By creating a choke on either side of a potential rupture, it effectively reduces in-line flowline movement as well as lateral movement, mitigating dangerous impacts. Engineered for Maximum Protection: The Safe-T-Whip™ Continuous system offers end-to-end restraint of flowlines for all lengths of pipe sections, swivels, and joints. Each section is secured by both the upstream and downstream sections of the flowline, ensuring comprehensive protection in the event of failure. Proper evaluation of the piping system is crucial to ensure adequate anchoring both upstream and downstream, enhancing safety. Certified for Uncompromising Quality: Safety is paramount, and that's why all Safe-T-Whip™ Restraints and Anchors undergo rigorous testing and certification to meet the highest industry standards. Our commitment to quality ensures that you receive a safety restraint system you can trust. Versatility and Flexibility: The Safe-T-Whip™ Continuous RD-XLong 30’-9” is designed for use on 2, 3, and 4-inch iron 1502 hammer union pipes, with recommended pressures ranging from 2,000psi to 15,000psi. Its versatility makes it ideal for various flowline configurations, ensuring superior protection for your operations. Enhanced Flowline Safety: Once installed correctly, the Safe-T-Whip™ Continuous RD-XLong 30’-9” is designed to limit unsafe flowline movement throughout the entire linear series of a flowline. With Safe-T-Whip™ Continuous RD-XLong 30’-9”, you can rest assured that your operations are safeguarded from catastrophic failures. The Ultimate Safety Restraint: SW-RD-XLong 30’-9” Safe-T-Whip™ Continuous is the ultimate safety restraint for extended applications. Trust in the power of Safe-T-Whip™ to safeguard your workforce, equipment, and operations. With Safe-T-Whip & Restraints Inc., safety is never compromised. Invest in Unparalleled Safety: SW-RD-XLong 30’-9” Safe-T-Whip™ Continuous is the pinnacle of safety restraints for extended applications. Secure your Safe-T-Whip™ Continuous RD-XLong 30’-9” today. Keep your operations safe with Safe-T-Whip & Restraints Inc., your trusted partner in safety.

Maximize Efficiency in Wellbore Clean-up with HOCA Oil Tools' Hydrostatic Bailers In the demanding world of oil and gas extraction, every operation demands precision, efficiency, and reliability. HOCA Oil Tools stands at the forefront of downhole solutions, offering innovative tools that redefine downhole operations. Among our acclaimed products is the Hydrostatic Bailer – a vital tool designed for effective wellbore clean-up and debris removal, ensuring operational integrity and minimizing downtime. Understanding the Hydrostatic Bailer The Hydrostatic Bailer, an essential component of our slick line tools range, is engineered to facilitate seamless debris removal from wellbores. Crafted with precision and made from high-grade materials, this tool is instrumental in maintaining clear, unobstructed wellbores, which is crucial for optimal production and operational safety. Employing the principles of hydrostatic pressure, the HOCA Hydrostatic Bailer removes sand, silt, and other obstructions with ease. Designed for versatility, it can be adapted to various well conditions and debris types, making it an indispensable tool for well operators and service companies alike. Elevate Your Wellbore Clean-up with HOCA Oil Tools At HOCA Oil Tools, we understand the complexities of downhole operations. Our commitment to innovation, quality, and customer satisfaction drives us to develop tools like the Hydrostatic Bailer, designed to address the real-world challenges faced by the oil and gas industry. Integrating HOCA’s Hydrostatic Bailers into your downhole operations not only optimizes well performance but also aligns with cost-effective and safe operational practices. As the industry evolves, rely on HOCA Oil Tools to provide the solutions that keep your operations running smoothly and efficiently. Experience the difference with HOCA’s Hydrostatic Bailers – your partner in achieving clear, productive, and safe wellbores. Trust HOCA Oil Tools for unparalleled downhole solutions that drive your operations forward.

Boost Your Construction Capabilities with Dozer Leasing from CWB National Leasing Empower Your Construction Projects with Flexible Equipment Solutions For any construction business, having the right equipment like dozers is essential for efficiency and success. Leasing your dozer through Canadian Western Bank (CWB) National Leasing provides a strategic and financially savvy solution that aligns perfectly with the needs of your construction projects. Here's why leasing a dozer through CWB National Leasing is a smart move for your business: 1. Rapid Equipment Acquisition CWB National Leasing understands the importance of time in the construction industry. They offer a streamlined leasing process, often approving applications within 48 hours. This means you can expect your dozer to be delivered and ready for use shortly after approval, reducing downtime and keeping your projects on schedule. 2. Enhanced Buying Power Leasing a dozer with CWB National Leasing boosts your purchasing capacity. It allows for periodic payments instead of a hefty initial investment, freeing up capital for other aspects of your business. Additionally, you can customize your dozer with extra features or accessories for a minimal increase in your payment, enhancing its functionality and efficiency. 3. Effective Cash Flow Management With manageable lease payments spread over the lease term, your dozer starts to contribute to your revenue even as you pay for it. This balanced approach helps maintain a healthy expense-to-revenue ratio, crucial for the financial health of your business. 4. Flexible Payment Structures CWB National Leasing offers payment plans that can be tailored to your business’s revenue cycle, including seasonal, semi-annual, or annual options. This flexibility is especially beneficial for construction businesses, where income can vary based on project timelines and seasons. 5. Potential Tax Advantages Leasing may provide tax benefits, as it allows you to expense lease payments instead of depreciating the capital cost of the dozer. Consulting with a tax advisor can help you understand how leasing can optimize your business’s tax situation. Conclusion Choosing to lease your dozer through CWB National Leasing is a strategic decision that enables your construction business to utilize essential equipment while maintaining financial flexibility. It ensures that you have the necessary tools for your projects without the burden of a large upfront investment, paving the way for growth, efficiency, and profitability in the competitive construction sector.

Elevate Your Operations with Kessels API-611 Compliant Steam Turbine: Where Precision Meets Excellence In the demanding realm of the oil and gas industry, precision, reliability, and adherence to standards are paramount. Kessels Steam Turbines takes pride in being a premier supplier of Steam Turbines that not only comply with but exceed the rigorous API-611 standards for general-purpose steam turbines. Setting New Standards in Steam Turbine Excellence Kessels Steam Turbines are at the forefront of driving pumps, fans, and compressors in Oil Refineries across the Middle East, India, and South East Asia. These turbines stand as testaments to our unwavering commitment to adhering to stringent design engineering practices set by oil giants and discerning end customers alike. Distinguishing Features of Kessels API-611 Single Stage Steam Turbines: Meets & Exceeds API-611 Standard: Our turbines not only meet but go beyond the API-611 standard, ensuring top-notch performance and reliability. Direct Drive Oil Relay Governors: Equipped with provisions for Direct Drive Oil relay constant speed governors conforming to NEMA class 'A' & NEMA class 'D'. Over Speed Mechanical Trip: Safety is paramount, and our turbines come with an over-speed mechanical trip with safety shut-off as standard. Versatile Gland Sealing: Gland sealing is achieved through carbon rings (up to six, removable), labyrinths, or mechanical steam seals. We offer the flexibility of choosing any combination of these three options. Impulse-Type Wheels: Provision for Single disc single-row, and Single disc two-row Curtis impulse-type wheels made of forged steel. Built-in Steam Strainer: As a standard feature, our turbines include a built-in steam strainer that is removable for your convenience. Versatile Support: Our turbines can be centerline or foot-mounted, offering flexibility in installation. Solenoid Trips: Provision for solenoid trips for remote shutdowns comes as standard, ensuring safety and control. Suitable for High Pressures: Built to handle high inlet and exhaust steam pressures, our turbines are robust and reliable. Horizontal and Vertical Orientation: Choose between horizontal and vertical shaft orientation to suit your specific needs. These features are a testament to our unwavering commitment to ensuring that customers can operate Kessels API-611 compliant Steam Turbines with complete peace of mind for their mechanical driving needs. Choose Kessels for Unparalleled Excellence Choosing Kessels Steam Turbines is a choice for excellence, precision, and reliability. Our API-611 Compliant Steam Turbines not only meet industry standards but surpass them, ensuring the highest levels of performance and safety for your operations. Empower Your Operations with Kessels In the competitive landscape of the oil and gas industry, precision and reliability are non-negotiable. Elevate your operations with the Kessels API-611 Compliant Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.

Boost Your Business Efficiency with Leased Scanners from CWB National Leasing Are you ready to supercharge your business, streamline your operations, and enhance your profits? Look no further than CWB National Leasing for all your scanner leasing needs. Here's why leasing scanners with us is the perfect choice: Get Your Equipment Fast In today's fast-paced business environment, quick access to cutting-edge technology is vital for staying competitive. At CWB National Leasing, we understand the urgency of acquiring your scanners promptly. When you apply for a scanner lease with us, you can expect a lightning-fast decision-making process. Just how fast are we? Typically, within a mere 48 hours of your approval, we'll notify your chosen equipment dealer that payment is on its way. All you need to do is sit back and relax while your high-quality scanners are delivered to your doorstep. For detailed information on our approval turnaround times, please refer to our information page. Increase Buying Power Your buying power is a valuable asset, and we're here to help you maximize it. Instead of making a significant upfront purchase, consider the benefits of periodic lease payments provided by CWB National Leasing. By choosing leasing, you can unlock essential cash resources that can be invested in other critical areas of your business. But that's not all—we go the extra mile by allowing you to enhance your scanners with additional features or accessories for a modest payment increase. Yes, that's right; we put the "POW" in Buying Power, offering you the flexibility to customize your equipment to meet your specific requirements. Control Your Cash Flow Effective cash flow management is pivotal for the success of any business. When you lease scanners with CWB National Leasing, you gain a powerful tool for achieving this control. Our lease agreements are designed to ensure small, manageable payments throughout the lease term. What does this mean for you? It means that as you pay off your scanners, they will start generating revenue for your business, allowing you to effortlessly balance your expenses with your income. This approach makes it easy to maintain a favorable expense-to-revenue ratio, putting you in command of your financial prosperity. Seasonal Payment Options At CWB National Leasing, we understand that businesses often experience seasonal variations in revenue. We are all about flexibility, and our leasing solutions are tailored to adapt to your unique financial cycles. Whether you prefer payments on a seasonal, semi-annual, or annual basis, we can structure your lease to seamlessly align with your revenue patterns. With CWB National Leasing, your scanner lease will always be convenient and tailored to your specific needs. Potential Tax Savings Leasing scanners through CWB National Leasing isn't just a smart business move; it can also offer potential tax benefits. In many instances, leasing allows you to expense lease payments, providing income tax advantages rather than dealing with the depreciation of equipment capital costs. To fully comprehend how leasing can optimize your business's tax position, we recommend consulting your tax advisor. Their expertise will assist you in navigating the tax advantages of leasing scanners with confidence. In conclusion, leasing scanners with CWB National Leasing is the strategic choice for business owners determined to enhance their efficiency, reduce costs, and increase profits. From lightning-fast equipment acquisition to increased buying power, controlled cash flow, flexible payment options, and potential tax savings, our leasing solutions are designed to empower your business. Don't compromise on your technology; choose CWB National Leasing for all your scanner leasing needs today!

ELEKS: Empowering Risk Management for a Secure Energy Future Navigate the complexities of the energy and utility sector with confidence, backed by ELEKS' custom software engineering expertise. Our specialized team can guide you in developing and implementing cutting-edge software solutions for power network monitoring and analysis, enabling you to effectively manage risks, address weaknesses, and predict potential challenges. Elevate Your Risk Management with ELEKS Energy Software Development: Embrace the power of advanced energy management software solutions that redefine the productivity, accessibility, safety, and sustainability of your business power system. Comprehensive Risk Assessment: With our software solutions, identify your power system's weak points swiftly and accurately. Effectively address network issues and predict potential risks, enabling you to take timely preventive measures. Custom Solutions Tailored to You: Collaborate with ELEKS to develop custom energy management software solutions designed to cater precisely to your risk management needs. Gain insights that empower you to make informed decisions. Why Choose ELEKS? Industry Expertise: ELEKS boasts a team of specialists with comprehensive experience in custom software engineering for the energy and utility sector. Trust us to understand and address your unique challenges. Predictive Insights: Stay ahead of potential risks with predictive analysis powered by our software solutions. Leverage insights to take preventive measures and ensure the stability of your power network. Cutting-Edge Technologies: Our solutions harness the latest technologies, including Cloud, IoT, blockchain, and more. Future-proof your risk management strategies with innovation at your fingertips. Empower a Secure Energy Future: In a dynamic industry where risks abound, ELEKS empowers you to manage uncertainties effectively. Secure your energy future with a proactive approach to risk assessment and mitigation. Join the Energy Resilience Revolution with ELEKS Embrace a future where risks are managed proactively and uncertainties are addressed with precision. ELEKS' energy software development solutions equip you with the tools needed to navigate the energy and utility sector confidently. It's time to lead the way towards a secure energy future – choose ELEKS as your partner in risk management and innovation.

Introducing the PDM (Positive Displacement Motor) from Marlin Oil Tools: The Ultimate Downhole Tool for Enhanced Coil Tubing Operations Marlin Oil Tools is proud to unveil the PDM (Positive Displacement Motor), a revolutionary downhole tool designed to maximize efficiency in coil tubing operations across the oil and gas industry. Engineered to convert the flow energy of pumping fluid into rotational force, the PDM is essential for a range of operations, from milling and cleanouts to supporting mechanical tubing cutters and Venturi junk baskets. Key Features of the PDM (Positive Displacement Motor): Energy Conversion: The PDM's main function is to transform pumping fluid energy into the rotation of the bearing mandrel, optimizing the performance of downhole tasks. Versatile Applications: Ideal for milling, cleanout operations, and as a driving force for mechanical tubing cutters and Venturi junk baskets, enhancing operational flexibility. Dual-Section Design: Comprises a robust bearing section and a power section, each designed to withstand the demands of downhole environments. Innovative Power Section: Features a stator with an inner spiral surface and a rotor with an outer spiral surface, ensuring efficient energy conversion and consistent torque. Continuous Tool Rotation: Guarantees that any tool installed below the motor receives continuous rotation, improving operational efficiency and effectiveness. Optimized for Coil Tubing: Specifically tailored for integration into the BHA during coil tubing operations, ensuring seamless performance and reliability. Elevate your coil tubing operations with the PDM (Positive Displacement Motor) from Marlin Oil Tools, a cutting-edge solution designed to transform fluid energy into mechanical rotation, optimizing downhole tasks. Whether it's milling, cleanouts, or supporting other downhole tools, the PDM enhances operational flexibility and efficiency. With its innovative power section and robust bearing assembly, the PDM ensures consistent tool rotation and performance, making it an indispensable tool for the oil and gas industry. Choose the PDM from Marlin Oil Tools for unparalleled efficiency and reliability in your downhole operations. Why Choose the PDM from Marlin Oil Tools? Enhanced Milling and Cleanout Efficiency: Specifically engineered to boost performance in critical downhole tasks. Broad Operational Flexibility: Compatible with a variety of tools and tasks, ensuring adaptability to your operational needs. Reliable Performance: Designed with durable components that guarantee consistent operation and longevity. Seamless Integration: Easily integrates into your existing BHA setup, providing a smooth operation during coil tubing interventions. The PDM (Positive Displacement Motor) by Marlin Oil Tools represents the forefront of downhole tool technology, offering oil and gas operators a powerful tool for improving efficiency and outcomes in well interventions. Incorporate the PDM into your operations to achieve superior results and operational excellence.

Revitalize Your Legacy Systems: Unleash Innovation with ELEKS' Application Re-Engineering Services In the rapidly evolving landscape of technology, staying ahead requires more than just keeping up – it demands transformation. Introducing ELEKS' Application Re-Engineering Services, designed to breathe new life into your core legacy systems, boosting performance, agility, scalability, and user experience. Let's explore how ELEKS can help you embrace the future by reimagining the past. Empowering Your Transformation Journey At ELEKS, we understand that your legacy systems are the foundation of your business. However, these systems can become roadblocks as technology advances and market demands change. Our Application Re-Engineering Services are your bridge to the future, combining technological innovation with a focus on superior user experience (UX) and business agility. The ELEKS Advantage: How We Help You 1. Creating a Superior UX: In a competitive marketplace, exceptional user experience is a game-changer. We help you design application interfaces that enhance usability, engage consumers, and give you the edge needed to stand out. Through updating your technology stack and refining application design, we boost functionality and elevate visuals. 2. Scalability and Flexibility: Adaptability is the cornerstone of modern success. Our cloud migration services enhance the scalability, security, and flexibility of your software solutions, enabling you to navigate the ever-changing business environment without the limitations of outdated legacy systems. 3. Faster Optimization: Time is of the essence. Our nearshore team of software experts establishes Continuous Integration/Continuous Deployment (CI/CD) processes, saving substantial time and effort. This eliminates the need for freezes that lead to downtime and revenue loss, ensuring rapid application optimization. 4. Enhanced App Maintainability: Simplify changes and maintenance with our SaaS delivery model. By incorporating the benefits of the Cloud, we streamline application adjustments, all while reducing costs compared to traditional on-site hosting. 5. Proactively Preventing Performance Issues: Don't wait for issues to arise – prevent them. We help you address and anticipate performance issues with strategic re-engineering services that update your architecture and technology stack, ensuring optimal functionality and responsiveness. Our Comprehensive Approach ELEKS' commitment to your success is reflected in our comprehensive approach: • Requirements and Scoping: We dive deep into your unique business proposition, gaining an in-depth understanding before defining project requirements, timelines, and budgets. This ensures our re-engineering solutions align perfectly with your needs. • Application Re-Engineering: Our team of seasoned software engineers designs and rigorously tests robust re-engineering solutions tailored to your legacy setup. Every update and adjustment we make adds tangible value, enhancing efficiency and performance. • Launch and Support: After scoping, we deploy, configure, and launch your re-engineered solution – be it on-premise, through the Cloud, or via mobile app stores. Benefit from ELEKS' L2/L3 Support services that reduce maintenance costs, allowing you to focus your team on essential business activities. Embrace the Future with ELEKS ELEKS' Application Re-Engineering Services are your ticket to a revitalized technological landscape. Experience improved performance, streamlined operations, and enhanced user experiences. Let us transform your legacy systems into powerful tools that drive your business forward. Embrace innovation today for a competitive edge tomorrow – partner with ELEKS and redefine your technological journey.

The AD-1™ tension packer is a compact, economical, retrievable packer. Primarily used in waterlood applications, it can also be used for production, treating operations, and when a set-down packer is impractical. And because the AD-1 is tension-set, it is ideally suited for shallow wells where set-down weight is not available. The ADL-1™ tension packer is a large-bore version of the AD-1 and offers the same features and beneits; running and retrieving operations are also the same. We can source from current stock or direct from the manufacturer.

An O-ring, also known as a packing or a toric joint, is a mechanical gasket in the shape of a torus; it is a loop of elastomer with a round cross-section, designed to be seated in a groove and compressed during assembly between two or more parts, forming a seal at the interface.

ELEKS Software Audit Services: Uncover Excellence in Every Line of Code In the dynamic landscape of software development, ensuring your products and processes are performing at their peak is crucial. ELEKS Software Audit Services empowers you to navigate the challenges and seize the opportunities that lie within your software solutions. With an unbiased approach, we help you identify strengths and weaknesses, mitigate risks, and streamline your path to success. ELEKS Software Audit Services: Guiding Your Path to Excellence Identify Flaws in Your SDLC: Our unbiased evaluation scrutinizes your current products, internal processes, and documents to identify strengths, weaknesses, and potential risks within your Software Development Lifecycle (SDLC). With these insights, we pave the way for a fortified software solution that stands strong against challenges. Build the Ultimate Product: Rigorous QA testing subjects your product to industry-acknowledged standards including IEEE 829, ISO 29119, IEEE 730, and ISO 25010. Our unbiased framework maximizes efficiency and detects bottlenecks before launch, equipping your product with the robustness it needs to thrive. Speed to Market: Our meticulous software audit identifies bottlenecks and snags within your software, development, and testing processes. This optimization not only saves valuable time but also preserves your revenue streams, driving your product faster to market. Elevate Project Artifacts: Project documentation and software outputs undergo rigorous evaluation, enhancing business maturity and elevating your overall development process. With our insights, your software journey becomes a path towards continual improvement. Craft a Solid Action Plan: Through stringent diagnostics, we pinpoint issues in your project maturity and business analysis processes. Our collaboration results in a well-defined software action plan, optimizing efficiency and shaping a brighter future. Build a Roadmap for Success: Post-evaluation, we collaborate closely to create a resilient framework for your software operations. We offer continued support, ensuring your path forward is clear and confident. Minimize Post-Release Issues: Validating end-to-end application performance, we detect software defects before your product goes live. Proactive identification and resolution of defects safeguard your product's performance and uphold your brand reputation. ELEKS Software Audit Services: A Five-Step Excellence Framework Discovery: • Plan and prepare • Identify business needs and goals Analysis: • Collect and analyze data • Conduct interview sessions • Verify findings • Present and discuss findings Presentation: • Present findings and recommendations Implementation: • Co-create an action plan • Implement audit recommendations Control: • Follow-up on the action plan Empower Your Software Solutions: Development Process Audit: Evaluate the stability of every facet of your process framework, from development and release to project management, QA, and BA processes. Software Audit: Our experts conduct comprehensive diagnostics to assess the strength of your software solution, covering architecture, database, code quality, security, UI/UX, and more. Post-Audit: Receive a summary report detailing discrepancies, their severity, associated risks, and recommendations. Collaborate with us to craft a detailed action plan for issue resolution. ELEKS Software Audit Services: Your Gateway to Excellence With ELEKS Software Audit Services, your software solutions are fortified, risks are mitigated, and excellence is uncovered. Let us guide you through the labyrinth of software development, ensuring every line of code is a testament to your success. Elevate your software solutions with ELEKS, where excellence is not just a goal, but a guarantee.

Illuminate Your Adventures with the Wisdom Lamp 4A: The Ultimate Multi-Purpose Headlamp from Provix Provix is thrilled to introduce the Wisdom Lamp 4A, a versatile and powerful multi-purpose headlamp designed to meet a variety of lighting needs. Whether you're a professional in the mining industry or an outdoor enthusiast, the Lamp 4A is engineered to provide exceptional illumination and functionality. Powerful and Versatile Lighting Options The Lamp 4A features three brightness modes: High (HI), Medium (ME), and Low (LO), catering to different lighting requirements. With an impressive light luminous flux of 533 lm (HI), 265 lm (ME), and 50 lm (LO), and an initial lighting degree of 25,000 lx (HI), 12,000 lx (ME), and 1,800 lx (LO), this headlamp ensures clear visibility in various environments. Long-Lasting and Rechargeable Battery Equipped with a robust 7,000mAh battery and a rated voltage of 3.7V, the Lamp 4A provides continuous discharging times of 5 hours (HI), 13 hours (ME), and 60 hours (LO). The battery is rechargeable, offering up to 1,200 cycles in reasonable working conditions, making it both sustainable and reliable. Unique Feature: Charge Your Cellphone In addition to its lighting capabilities, the Lamp 4A can charge your cellphone, making it a handy tool for emergencies or outdoor activities. This unique feature, coupled with its USB charging ability and a quick 5-hour charging time, adds to its versatility and appeal. Built for Durability and Safety The Lamp 4A is designed with safety in mind. It is water-proof with an IP68 rating and includes a short circuit protection time of less than 320μs. Its durable design ensures it withstands harsh conditions, suitable for both professional and recreational use. Lightweight and Compact Design Weighing just 169g (5.96 oz) and with dimensions of 84x69x50mm (3.3x2.7x2.0in), the Lamp 4A is compact and comfortable to wear, making it ideal for extended use without causing fatigue. SOS Function for Emergency Situations An added SOS function makes the Lamp 4A a vital tool for emergency situations, providing an extra layer of safety during outdoor adventures or in hazardous work environments. Get Your Wisdom Lamp 4A Today The Wisdom Lamp 4A is available now at Provix, ready to light up your work and adventures with its exceptional features. . Experience the difference with the Lamp 4A – your reliable companion in lighting.

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.