Long Haul Link Repairs

Stay Connected with Poseidon Robotics' Advanced ROV Communications Systems In the dynamic world of subsea exploration and robotics, seamless communication is the key to success. At Poseidon Robotics, we understand the critical role that robust and reliable communication systems play in the success of your Remote Operated Vehicle (ROV) missions. That's why we are thrilled to introduce our state-of-the-art ROV Communications Systems, designed to keep you connected and informed throughout your underwater operations. A Complete Communication Solution Our ROV Communications Systems are more than just individual components – they are a complete and integrated solution. The system includes telemetry units, a cutting-edge 3kV step-down transformer, and a Coarse Wave Division Multiplexer (CWDM) assembly that seamlessly feeds them. These components are carefully installed as a system and are ready to be wired, ensuring a hassle-free setup process and maximum performance. Robust Telemetry Units The heart of our ROV Communications Systems lies in our advanced telemetry units. These units are built to withstand the harsh subsea environment and are tested rigorously to ensure top-notch performance. Equipped with multiple Ethernet, video, and serial connections, our telemetry units provide a robust communication interface for your ROV, enabling seamless data transfer, control, and feedback during your underwater missions. 3kV Step-Down Transformer and CWDM Assembly Our innovative 3kV step-down transformer is a key component of the communication system. It allows for efficient and safe voltage reduction, ensuring that your subsea equipment receives the power it needs without compromising safety. The Coarse Wave Division Multiplexer (CWDM) assembly further enhances the system's capabilities by providing high-speed optical communication links, allowing for increased data capacity and transmission rates. Reliable and Efficient Integration At Poseidon Robotics, we pride ourselves on delivering products that are not only technologically advanced but also user-friendly. Our ROV Communications Systems are pre-integrated and designed to seamlessly work together, saving you time and effort during installation and setup. With our system, you can rest assured that your ROV's communication infrastructure is optimized for performance and reliability. Unleash the Power of Communication Experience the power of seamless communication with Poseidon Robotics' ROV Communications Systems. Whether you are conducting scientific research, performing subsea inspections, or engaging in search and rescue operations, our communication solutions will keep you connected, informed, and in control. Say goodbye to communication challenges and embrace a new level of efficiency and effectiveness in your underwater missions. Choose Poseidon Robotics With a legacy of excellence and innovation, Poseidon Robotics is your trusted partner in the subsea robotics industry. Our commitment to quality, reliability, and customer satisfaction drives us to deliver cutting-edge solutions that exceed expectations. Join the growing community of satisfied customers and elevate your ROV operations with Poseidon Robotics' advanced communication systems. Stay Connected, Stay Successful Don't let communication gaps hinder your subsea missions. Embrace the power of seamless communication with Poseidon Robotics' ROV Communications Systems. Contact us today to learn more about our products and how they can enhance your underwater operations. Stay connected, stay successful with Poseidon Robotics!

Spooling units designed to ensure cables or control lines are kept in tension while running in or out of hole. Our spooling units are fully designed, manufactured and assembled with sheaves (half or full moon) to guide control, injection, or mono-conductor cable preventing damage while being tripped in hole. Units are available in pneumatic, hydraulic, or electric drive and are ATEX zone and DNV certified as required by location. Spooling units can also be equipped with a filling pump to monitor pressure while tripping – improving efficiency as a sudden pressure drop indicates line damage.

Introducing Safe-T-Whip RD-2-01 4’: Your Ultimate Safety Restraint for Extreme Pressure Environments Safety is paramount in the oilfield industry, and at Safe-T-Whip & Restraints Inc., we take it to heart. We are thrilled to present our latest innovation - the SW-RD-2-01 Safe-T-Whip RD, designed to provide unmatched safety and reliability even in the most extreme pressure environments. Unmatched Design and Performance: Identified by its bold yellow color and yellow tag, SW-RD-2-01 Safe-T-Whip RD is crafted from 1/2" 12-Strand HMPE fiber, making it a "Regular Duty" (RD) safety restraint. This powerful safety whip is engineered for use on 2-inch 1502 hammer union pipelines up to a staggering 15,000psi or 3-inch iron up to 10,000psi. When it comes to restraining high-pressure flowlines, trust Safe-T-Whip RD-2-01 to deliver the highest level of protection. Revolutionary Modulus Synthetic Fiber: Safe-T-WhipTM harnesses the power of high modulus polyethylene (HMPE), also known as ultrahigh molecular weight polyethylene (UHMWPE). Ropes made from this synthetic material are as strong as steel-wire ropes, yet significantly lighter, making them easy to handle, store, and haul. The durability and lightness of SW-RD-2-01 save precious time and money for rig hands and operators alike. Built for Extreme Conditions: The Canadian oil patch presents demanding drilling and fracking conditions. That's why Safe-T-Whip RD-2-01 is designed to withstand the toughest challenges. Easy to pressure hose and impervious to corrosion, oil spills, and most chemicals, our safety restraints thrive in the harshest environments, ensuring your team's safety is never compromised. Chemical Immersion and Temperature Resilience: SW-RD-2-01 exhibits exceptional strength retention after 6-month immersion in various chemicals, including sea water, hydraulic fluid, gasoline, hydrochloric acid, and more. It operates efficiently within a wide temperature range from -65°C to +65°C, making it ideal for the extreme temperatures often encountered in the oilfield. Our safety restraint system is also chemically inert, ensuring it remains steadfast over time. Certified and Tested for Quality: Your safety is our priority, and that's why we provide test and engineer reports, as well as certificates, available upon request. Our commitment to quality and excellence ensures that every Safe-T-Whip RD-2-01 undergoes rigorous testing to meet the highest industry standards. Your Partner in Safety: When it comes to safety in extreme pressure environments, Safe-T-Whip & Restraints Inc. is your reliable partner. Trust in the power of SW-RD-2-01 Safe-T-Whip RD to protect your workforce, equipment, and operations, ensuring compliance with safety regulations and delivering peace of mind to you and your team. Invest in Safe-T-Whip RD-2-01 4' and experience unparalleled safety in high-pressure environments. With Safe-T-Whip & Restraints Inc., your safety is always secured.

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

Introducing the Revolutionary EDC (External Dimple Connector) from Marlin Oil Tools: The Essential Link for Coiled Tubing Applications in the Oil and Gas Industry Marlin Oil Tools proudly presents our state-of-the-art EDC (External Dimple Connector), a groundbreaking solution designed to seamlessly integrate the smooth lower end of coiled tubing (CT) with any requisite downhole tool for efficient well intervention operations. The EDC stands out in the oil and gas sector for its innovative design and unparalleled reliability, making it a must-have for your well intervention toolkit. Key Features of the EDC (External Dimple Connector): Seamless Integration: The EDC provides a flawless connection between the smooth-walled end of the CT and the threaded interface of downhole tools, ensuring a secure and efficient link for well intervention jobs. Advanced Connection Mechanism: Equipped with a unique holes matrix in the upper housing, the EDC utilizes set screws installed in precision-pressed dimples, offering a robust and reliable connection without compromising the integrity of the coiled tubing. Threaded Lower Part: The connector's lower portion features a meticulously designed thread for attaching any downhole tool, facilitating a versatile and adaptable solution for various well intervention needs. High-Performance Sealing: Installation of the EDC is enhanced with two O-rings made from the durable FKM 90 material, providing a high-integrity seal between the internal space of the connector and the annulus, ensuring operational safety and efficiency. Effortless Installation: The EDC can be effortlessly installed using a dimple tool, capable of mechanical or hydraulic pressing, simplifying the assembly process and minimizing downtime during critical operations. At Marlin Oil Tools, we understand the complexities and challenges of well intervention in the oil and gas industry. Our EDC (External Dimple Connector) is designed to address these challenges, offering a reliable, efficient, and high-quality connection solution for coiled tubing operations. Whether you are conducting routine maintenance, stimulation, or any other well intervention job, the EDC ensures a seamless, secure, and effective operation. Why Choose Marlin Oil Tools' EDC? Unmatched Reliability: Engineered for durability and performance, the EDC withstands the harsh conditions of downhole operations, ensuring reliability when it matters most. Versatility: Compatible with a wide range of downhole tools, the EDC offers unparalleled flexibility for your well intervention needs. Quality Assurance: At Marlin Oil Tools, quality is at the forefront of everything we do. The EDC is manufactured to the highest industry standards, ensuring peak performance and safety. Elevate your coiled tubing operations with the EDC (External Dimple Connector) from Marlin Oil Tools. Contact us today to learn more about how our innovative solutions can enhance your well intervention strategies and drive operational success.

ELEKS: Crafting Excellence through Innovative Product and Service Design In the fast-paced world of technology and business, innovation is the key to staying ahead. At ELEKS, we're more than just a software engineering company – we're your partners in innovation. Our Product and Service Design offerings are your gateway to creating exceptional domain-specific technology solutions that resonate with your brand's vision and scale. Bringing Your Visions to Life: We're here to turn your business ideas into reality. With a deep focus on understanding your users' needs, we help you design and validate disruptive concepts that resonate with the market. Our seasoned experts collaborate with you to define your value proposition and chart an actionable roadmap to success. Revitalize Existing Offerings: Are users leaving your products untouched? Our services extend to reimagining your current offerings for growth. We identify revenue streams within your existing products, coupled with enhancing the efficiency of legacy systems, to rejuvenate your market presence. Smart, Forward-Looking Decisions: Navigating uncertainty requires foresight. Our team of experts guides you in creating sustainable, industry-leading product strategies. Whether you're steering a new product or aligning short-term goals with a visionary outlook, we're here to help you stay ahead of the curve. Testing Bold Business Concepts: Entering a new market or amplifying your presence? Our team delves deep into your business goals, market dynamics, and technological horizons. Armed with this analysis, we craft service concepts that align with your needs and are backed by technology-proven solutions. Accelerate Time-to-Market: Your success is our mission. Our product design service accelerates your journey from concept to market. Startups secure investment, and enterprises streamline delivery processes, all while validating ideas through prototyping and testing. Enhance Customer Experience: Transition from mere communication to complete immersion. We identify gaps in your customer experience and develop actionable plans for a service proposition that captivates, engages, and leaves a lasting impression. Unlock the ELEKS Advantage: Experience counts. Since 2009, our design and technology consulting team has propelled visionary entrepreneurs and product leaders forward. We empower you to transform groundbreaking ideas into tangible customer value. Top Ten Benefits of ELEKS' Product and Service Design Services: 1. Breakthrough Ideation: Transform ideas into game-changing concepts backed by user insights. 2. Enhanced Engagement: Create customer-centric strategies through behavioral science. 3. Strategic Roadmapping: Chart a comprehensive product strategy with clear priorities. 4. Winning Business Models: Validate models for competitive advantages and market fit. 5. Technological Excellence: Design products that optimize performance and scalability. 6. Deep User Insights: Understand customers through qualitative and quantitative research. 7. Inclusivity Assessment: Extend reach by crafting products inclusive to diverse needs. 8. Innovative Workshops: Unleash potential through tailored Innovation Workshops™. 9. Streamlined Experience: Identify bottlenecks and unlock new opportunities. 10. Expert Product Strategy: Implement scalable solutions with comprehensive guidance. ELEKS is your conduit to design and innovation, committed to transforming your ideas into impactful reality. From envisioning concepts to realizing industry-leading solutions, we are your steadfast partners in innovation. With ELEKS, your aspirations find a partner dedicated to propelling them into the future. Welcome to the realm of design and innovation – welcome to ELEKS.

Revolutionize Your Business with Engraver Leasing from CWB National Leasing Unleashing Creativity and Precision in Your Operations with Flexible Equipment Solutions For businesses in the signage, trophy, customization, or manufacturing industries, engravers are essential tools for adding intricate details and personalization to products. Leasing engravers through Canadian Western Bank (CWB) National Leasing offers an advantageous and financially sound solution for businesses looking to enhance their engraving capabilities. Here’s how leasing engravers can transform your business operations: 1. Quick Equipment Deployment CWB National Leasing recognizes the importance of keeping your operations uninterrupted. They ensure a rapid leasing process, typically making decisions within 48 hours of application submission. This swift turnaround means your engravers can be delivered and ready for use quickly, ensuring your business continues to run smoothly and efficiently. 2. Enhanced Financial Power Leasing engravers with CWB National Leasing increases your financial flexibility. Opting for periodic payments over a substantial initial purchase frees up capital for other critical aspects of your business. Additionally, the option to add extra features or accessories to your engravers for a small payment increase allows for customization to meet specific business needs. 3. Balanced Cash Flow Management Smaller lease payments over the term mean your engravers start contributing to your business’s revenue while still being paid off. This financial strategy is essential in maintaining a healthy balance between expenses and revenue, crucial for long-term business sustainability and growth. 4. Customizable Payment Plans CWB National Leasing offers a range of payment options, including seasonal, semi-annual, or annual plans, to match your business’s revenue cycle. This flexibility is especially beneficial for businesses with variable or seasonal income, ensuring that payments are manageable and fit your financial situation. 5. Potential Tax Benefits Leasing engravers can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can positively impact your business’s tax position. Conclusion Opting to lease engravers through CWB National Leasing is a strategic decision that equips your business with critical tools while maintaining financial agility. It ensures access to advanced engraving equipment, vital for delivering precision and creativity in your products, without the financial burden of a large upfront investment. This leasing approach enables enhanced operational efficiency, increased production capacity, and greater profitability, helping your business excel in the competitive customization and manufacturing market.

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

Introducing the Innovative ESC (External Slip Type Connector) by Marlin Oil Tools: Your Solution for Reliable Coiled Tubing Connections in the Oil and Gas Industry Marlin Oil Tools is at the forefront of delivering cutting-edge solutions tailored for the dynamic needs of the oil and gas sector. Our latest innovation, the ESC (External Slip Type Connector), is designed to revolutionize well intervention operations by providing a secure and efficient method to connect the smooth lower end of coiled tubing (CT) to any downhole tool. Here’s why the ESC stands as a pivotal advancement in coiled tubing technology: Key Features of the ESC (External Slip Type Connector): Innovative Connection Design: The ESC boasts an internal collet mechanism with inward-pointing teeth, ensuring a tight grip on the smooth outer wall of the CT. This design guarantees a secure connection, vital for the successful execution of well intervention jobs. Enhanced Sealing Capabilities: Equipped with two O-rings made from the highly durable FKM 90 material, the ESC offers exceptional sealing, isolating the internal space of the connector from the annulus. This feature is crucial for maintaining the integrity of well operations and preventing fluid leakage. Robust and Reliable: The use of a trapezoidal thread in conjunction with high-quality metals provides a connection that is not only reliable but also capable of withstanding the rigorous demands of downhole activities. The ESC is built to ensure the safety and efficiency of well work. Versatile Tool Connection: The lower housing of the ESC features a standard working taper thread, making it compatible with a wide range of downhole tools. This versatility allows for seamless make-up and enhances the tool's utility across various well intervention scenarios. Marlin Oil Tools presents the ESC (External Slip Type Connector), an essential coiled tubing tool for oil and gas well intervention. Designed to securely link the smooth lower end of CT to threaded downhole tools, the ESC is engineered for reliability and efficiency. Featuring an internal collet with inward-pointing teeth for a firm grip, and dual O-rings made from FKM 90 for superior sealing, this connector ensures operational integrity. With its trapezoidal thread and high-quality metal construction, the ESC stands as a beacon of durability in harsh downhole environments. Its standard working taper thread accommodates various downhole tools, making it a versatile addition to your well intervention arsenal. Why Choose the ESC from Marlin Oil Tools? Security and Efficiency: The ESC’s innovative design ensures a secure connection between coiled tubing and downhole tools, optimizing well intervention operations. Superior Sealing: With its advanced sealing capabilities, the ESC prevents fluid leakage, protecting the well's integrity. Durability: Built with high-quality materials and a robust thread design, the ESC is designed to endure the toughest downhole conditions. Versatility: Its compatibility with a broad range of downhole tools makes it a flexible solution for various well intervention needs. Elevate your well intervention operations with the ESC (External Slip Type Connector) from Marlin Oil Tools. Contact us today to discover how our solutions can enhance your efficiency and operational success in the oil and gas industry.

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

The C-1™ packer can be run as a conventionally set packer or, when run upside down, it can be set in compression. Emergency releases are provided for tension and compression operations. The G™ packer is an economical, compression-set packer, intended for lower pressure production applications. It is set by one-quarter-turn right-hand rotation. Release is accomplished by straight pickup of the tubing. If it is necessary to move the packer further downhole after release, one-fourth-turn left-hand rotation will put the tool back into the running position.

ELEKS: Powering the Future of Efficient Energy Distribution Management Harness the power of technology to revolutionize energy distribution management with ELEKS. Our expertise in energy software development brings stability, accessibility, cleanliness, and sustainability to your consumers while ensuring the resilience of your networks against challenges and threats. As a leading energy software company, we're at the forefront of developing and integrating Custom Distribution Management Systems (ADMS) that empower utility suppliers to meet customer demands for power quality, reliability, and data security. Elevate Your Energy Management with ELEKS Energy Software Development: Embrace the future of energy management with our advanced software solutions. Dramatically enhance productivity, accessibility, safety, and sustainability in your business power system. Join the ranks of forward-thinkers who are leveraging technology to redefine the energy landscape. Empowering Energy Producers and Distributors: Customized Solutions for You: As a seasoned custom software development company, ELEKS has been empowering energy producers, distributors, smart city developers, and governmental organizations for three decades. Our expertise lies in crafting tailored data-driven software solutions and energy management systems that leverage cutting-edge technologies such as Cloud, IoT, blockchain, and drones. Unveiling the Future of Energy Management: Understanding Your Needs: We comprehend the intricacies of the energy and utility industry – from modern power management solutions for diverse sources to facilities and businesses. Our journey has been marked by refining our understanding of unique industry challenges and leveraging technology to develop innovative solutions. Why Choose ELEKS? Experience That Matters: With a legacy spanning thirty years, ELEKS brings a wealth of experience to the table. Our team of experts is well-versed in addressing complex energy management challenges. Cutting-Edge Technologies: Our energy software development solutions are fueled by the latest technologies, including Cloud, IoT, blockchain, and more. Stay ahead of the curve and embrace the future with confidence. Empower Efficiency and Sustainability: Energy efficiency and sustainability aren't just buzzwords – they're critical factors in a changing world. ELEKS' solutions empower you to meet these demands head-on. Join the Energy Revolution with ELEKS Revolutionize the energy distribution landscape and empower efficient energy management with ELEKS. Our energy software development solutions are designed to catapult your business into a future of resilience, reliability, and sustainability. Embrace innovation – choose ELEKS to lead the way into a brighter, greener future.

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

InWaTec Combined: Streamlining Well Integrity with Expert Mechanical Plug Operations In the intricate sphere of well servicing, the ability to effectively isolate sections of the wellbore is crucial. At InWaTec Combined, we specialize in providing top-tier Pulling and Setting Mechanical Plug services that ensure well integrity through precision and reliability, all achieved via mechanical wireline manipulation. Sophisticated Simplicity in Well Isolation Our mechanical plug services are designed to provide a seamless solution for wellbore isolation. The mechanical plugs can be set using the finesse of wireline operations alone, without the need for complex hydraulic systems. This method exemplifies our commitment to sophisticated yet simple solutions, providing our clients with a straightforward and efficient means to secure their wells. Tailored Tools for Diverse Requirements Recognizing that wells come in various sizes and specifications, InWaTec Combined has developed a selection of running tools to match. Depending on the size of the mechanical plug, we employ one of two specialized running tools. Each tool is designed to engage with the plug precisely, ensuring a secure and accurate setting every time. Versatility Across Operations Whether it’s a routine intervention or an emergency response, our Pulling and Setting Mechanical Plug services are versatile enough to adapt to the specific needs of the operation. This versatility is a testament to the depth of our expertise and the breadth of our technological capabilities. Efficiency in Execution The use of mechanical wireline manipulation for setting and pulling plugs not only provides precision but also enhances operational efficiency. By eliminating the need for additional hydraulic equipment, we can execute operations more quickly, reducing downtime and optimizing well productivity. A Commitment to Operational Excellence At InWaTec Combined, our services are underpinned by a steadfast commitment to operational excellence. We don’t just deliver tools and technologies; we provide a partnership that prioritizes the integrity and productivity of your well operations. Our experienced technicians and state-of-the-art equipment stand ready to deliver results that exceed expectations. Conclusion: Ensuring Well Integrity with Precision In conclusion, InWaTec Combined's Pulling and Setting Mechanical Plug services represent the pinnacle of well intervention solutions. Our precision-engineered tools and expert wireline manipulation techniques ensure that well integrity is maintained with the utmost efficiency and reliability. Trust InWaTec Combined to be your partner in well servicing operations, where every plug set is a step towards ensuring the ongoing success and safety of your well activities.

KEY360 Inc offers a single integrated Business Management Platform comprising Business Intelligence, Project Management, Big Data & Analytics, ERP, Behaviour and Strategy Modification. - Over 140 Business and Project Management Systems on one platform available - Unique and extremely effective workflow engine - Remarkable “BIG DATA” and bulk transaction capability - Integrated Real Time reporting and dashboarding - Multi-company platform allows all project users to integrate seamlessly KEY Differentiators: - KEY360 Provides an exceptional opportunity for your organisation to attract new clients and build long terms relationships. - KEY360 is a Microsoft Gold Partner and Approved Microsoft Co-Sell Partner and can be purchased directly from the below online marketplaces: - Microsoft AppSource: KEY360 Capital Management Projects - Azure Marketplace: KEY360 Capital Management Projects - KEY360 is reputedly the most comprehensive and versatile Capital Project Management, Business Digitalization & Business Optimization solution available.

Poseidon Robotics' Custom Lift Points: Unparalleled Strength for Your Subsea Lifting Needs When it comes to subsea operations, lifting heavy loads with precision and safety is a paramount concern. At Poseidon Robotics, we are proud to introduce our state-of-the-art Custom Lift Points—a breakthrough in subsea lifting technology. Engineered for exceptional strength and load-bearing capabilities, our Custom Lift Points are built to withstand the most challenging underwater lifting tasks. Strength Meets Customization At Poseidon Robotics, we understand that no two subsea projects are the same. That's why our Custom Lift Points are designed with versatility and customization in mind. We work closely with you to tailor our lift points to your specific requirements, ensuring that they seamlessly integrate with your subsea equipment, ROVs, or other subsea systems. Load Tested to Perfection Safety is at the core of everything we do at Poseidon Robotics. Our Custom Lift Points undergo rigorous load testing to ensure they exceed industry standards and can handle immense weights with ease. Rest assured that our lift points are reliable and dependable, giving you peace of mind during critical lifting operations. A Robust Solution for All Environments Subsea environments can be harsh and unforgiving, but our Custom Lift Points are up to the challenge. Crafted from high-quality materials, our lift points offer excellent corrosion resistance, making them suitable for prolonged underwater use without compromising on strength and performance. Versatility and Adaptability Whether you're dealing with offshore installations, subsea construction, or scientific research, our Custom Lift Points adapt to diverse applications. Their flexible design allows for easy integration into various subsea equipment and systems, giving you the freedom to tackle a wide range of projects efficiently. A Commitment to Excellence Poseidon Robotics takes pride in our commitment to excellence. Our team of experienced engineers and technicians ensures that each Custom Lift Point is meticulously crafted to meet the highest standards of quality and reliability. We leave no stone unturned in delivering lifting solutions that empower your subsea operations. Experience the Power of Poseidon Robotics' Custom Lift Points Embrace a new era of subsea lifting with Poseidon Robotics' Custom Lift Points. With unbeatable strength, unmatched customization, and unwavering safety, our lift points redefine what's possible beneath the waves. Join the Poseidon Robotics Revolution Unlock the potential of your subsea projects with Poseidon Robotics as your trusted partner. Our Custom Lift Points, load tested to an astounding 55,000 lbs, are here to elevate your subsea lifting capabilities to new heights. Discover the Future of Subsea Lifting Take the next step in your subsea journey with Poseidon Robotics. Contact us today to explore the possibilities of our Custom Lift Points and embark on a transformative subsea lifting experience. At Poseidon Robotics, we lift the world below the surface.

Unleash the Power of Precision: The Newton Grabber by Poseidon Robotics At Poseidon Robotics, we're dedicated to revolutionizing subsea exploration and robotics. Our commitment to innovation has led to the supply of cutting-edge products, and today, we're thrilled to introduce the Newton Grabber, a game-changer in the world of subsea robotics. A Seamless Solution for Enhanced Operations The Newton Grabber is engineered to elevate the capabilities of the BlueROV2 and other subsea vehicles by providing them with the ability to interact with the subsea environment like never before. Whether it's retrieving objects, attaching recovery lines, or freeing a snagged tether, the Newton Gripper delivers unmatched precision and performance, making it an invaluable tool for underwater missions. Intelligent Design: Functionality without Compromise One of the standout features of the Newton Grabber is its intelligent design that seamlessly integrates with your subsea operations. We understand that during certain missions, the grabber might be in the way. To address this, our innovative design allows you to hide the Newton Grabber inside the frame, under the buoyancy. No need for disconnection or removing valuable components; simply tuck it away and continue with your operation without interruption. Versatility at its Best The Newton Grabber is a versatile tool that suits a wide range of subsea applications. From delicate maneuvers to robust tasks, the grabber's capabilities adapt to the requirements of your mission. Its ability to retrieve objects and interact with the subsea environment opens up endless possibilities for scientific research, inspection, search and rescue operations, and more. Ease of Installation and Everything You Need Poseidon Robotics prioritizes simplicity and efficiency in every aspect, including installation. The Newton Grabber comes complete with everything needed for seamless installation on the BlueROV2. It has been meticulously designed the system to ensure a hassle-free integration process, allowing you to get your subsea vehicle up and running quickly. Experience Poseidon Robotics Quality As pioneers in subsea robotics, Poseidon Robotics consistently delivers products that redefine industry standards. The Newton Grabber is no exception, setting a new benchmark for performance, reliability, and versatility. Designed to endure the harshest underwater conditions, this grabber is engineered to withstand the demands of challenging subsea operations. Unlock New Possibilities with the Newton Grabber Are you ready to take your subsea operations to the next level? Unlock the full potential of your BlueROV2 or subsea vehicle with the Newton Grabber. Reach out to us today, and let our team of experts assist you in choosing the perfect solution for your specific needs. Experience the power of precision and elevate your subsea exploration with Poseidon Robotics.

Discover Precision Welding with the TIG AC/DC 301 Pulse! At Canaweld, we take pride in providing welding solutions that are powerful, intelligent, and reliable. The TIG AC/DC 301 Pulse is no exception – a welding machine that exemplifies precision and performance. Designed to meet the diverse needs of professionals in the oil and gas industry, this welding powerhouse offers unparalleled versatility and ease of use. Versatile Welding Capabilities The TIG AC/DC 301 Pulse is a welding marvel, capable of both AC and DC TIG welding, including stainless, mild steel, and aluminum, as well as Stick welding. Whatever the application, our advanced TIG welding parameters enable you to fine-tune the welding process, delivering exceptional results every time. From intricate welding tasks to heavy-duty projects, the AC/DC 301 Pulse rises to the occasion, giving you the flexibility to tackle any welding challenge. Power Meets Intelligence Built with intelligence and efficiency in mind, the AC/DC 301 Pulse features digital control of all welding parameters. This intuitive interface empowers you to tailor the welding settings precisely to your needs, ensuring flawless welds with ease. Additionally, the easy-to-use pulse mode, complete with the "easy-pulse" function, simplifies your welding experience, providing maximum control over your welds. Durable and Portable Design Designed for the rigors of the oil and gas industry, the TIG AC/DC 301 Pulse boasts a compact and innovative design. The shock-proof fiber compound front panel and control panel protection safeguard the machine against accidental impact, ensuring long-lasting performance even in challenging environments. The robust handle integrated into the chassis makes it easy to carry, offering mobility and convenience when moving between welding tasks. Efficient and Reliable Performance With a high duty cycle, the AC/DC 301 Pulse proves to be a workhorse, perfect for production TIG welders who demand the best all day, every day. Its exceptional TIG welding characteristics, paired with automatic compensation for power fluctuations, guarantee consistent and reliable performance in every weld. Unmatched Control and Customization Take control of your welding with the TIG AC/DC 301 Pulse. Special TIG torches enable remote control of welding parameters directly from the torch, giving you the flexibility to fine-tune your welds while working. Furthermore, optional software customization offers added features and tailored settings, enhancing your welding experience even further. Experience the Canaweld Advantage As with all Canaweld products, the TIG AC/DC 301 Pulse is backed by our commitment to quality and customer satisfaction. We stand by the durability and reliability of our welding machines, offering a comprehensive 3-year warranty for your peace of mind. Elevate your welding capabilities with the TIG AC/DC 301 Pulse. Discover precision welding like never before and let Canaweld be your partner in achieving excellence in every weld. Embrace the power of intelligence with the TIG AC/DC 301 Pulse - Welding Perfected!

Introducing the JWN Jet Wash Nozzle from Marlin Oil Tools: A Revolution in Well Intervention and Perforation Technology Marlin Oil Tools is proud to unveil the JWN Jet Wash Nozzle, an advanced downhole tool specifically engineered for precision well intervention and perforation tasks. As a critical component of the Bottom Hole Assembly (BHA), the JWN Jet Wash Nozzle is designed to enhance the efficiency of perforating casing or tubing by utilizing a high-speed jet of a gel-sand mixture directed at the well's inner casing wall. Here’s why the JWN Jet Wash Nozzle is a game-changer in the oil and gas industry. Key Features of the JWN Jet Wash Nozzle: Precision Perforation: The JWN Jet Wash Nozzle delivers a high-velocity jet stream of a gel-sand mixture, enabling precise and efficient perforation of the casing or tubing. Abrasive-Resistant Materials: Constructed from materials that resist wear from abrasive particles, ensuring longevity and reliability under harsh downhole conditions. Versatile Design Options: Available in a basic design for continuous circulation or a ball-activated design that opens nozzles only after a ball drop, providing flexibility for specific operational needs. Enhanced Well Productivity: By performing abrasive cuts through metal, cement, and part of the surrounding rock, the JWN enhances well connectivity and productivity. Seamless BHA Integration: Designed to run in hole as part of the BHA alongside other downhole tools, the JWN Jet Wash Nozzle is compatible with a wide range of well intervention equipment. Elevate your well intervention and perforation operations with the JWN Jet Wash Nozzle from Marlin Oil Tools, a leading-edge solution designed for optimal efficiency and precision in the oil and gas sector. Featuring abrasive-resistant nozzles and a high-speed gel-sand mixture jet, the JWN Jet Wash Nozzle precisely perforates casing and tubing, improving well productivity. With options for continuous circulation or ball-activated operation, this tool offers unparalleled flexibility and durability for your well intervention needs. Choose the JWN Jet Wash Nozzle for a reliable, efficient, and versatile solution in enhancing well connectivity and output. Why Choose the JWN Jet Wash Nozzle from Marlin Oil Tools? Targeted Perforation: Achieves precise perforation for improved fluid flow and well performance. Durable Construction: Built to withstand the rigors of abrasive materials, ensuring tool integrity and operational longevity. Operational Flexibility: Adapts to various well intervention scenarios with basic and ball-activated designs. Improved Efficiency: Reduces downtime and enhances well productivity through efficient and effective perforation. The JWN Jet Wash Nozzle by Marlin Oil Tools represents the pinnacle of well intervention technology, providing operators with a powerful tool for enhancing well integrity and performance. Incorporate the JWN Jet Wash Nozzle into your operations to achieve superior results in well perforation and intervention tasks.

The WellStar® tubing-retrievable safety valve (TRSV) is a general production, hydraulically operated, downhole TRSV. The rugged hydraulic actuator of the WellStar safety valve provides durability and isolates the internal workings from well fluids through its unique construction. The metal-to-metal (MTM) sealing integrity in the body joints and closure mechanism places it in a premium valve category while featuring an economical price. Proven through years of installations, the simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions Features » Simple, compact design » Complete MTM well containment in the closed position (body/seat connections and flapper) » MTM flapper sealing (no resilient seal required) » Unique hydraulic actuation (single-piece piston/ flow tube) » Hydraulic chamber construction isolates the majority of the internal valve components and exposes them to clean hydraulic fluid » Positive debris barrier at both ends of flow tube in full open position » Maximized piston area and spring force » Flow tube construction prevents well solids and debris from settling on top of the piston *information referenced from supplier catalog.