Inverter and Charger Combination

Precision Chemical Stimulation with InWaTec Combined’s Mini-Coil Services In the realm of enhancing well productivity, chemical stimulation stands as a cornerstone technique, vital for improving hydrocarbon flow from reservoir to surface. InWaTec Combined proudly offers Mini-Coil Services, a highly specialized approach to chemical stimulation that addresses the need for precise fluid placement and robust performance under high pressures. Our Mini-Coil Tubing is the ideal conduit for delivering stimulation fluids in exact quantities directly to the target zones within the well. This precise delivery is critical for the effectiveness of chemical treatments, ensuring that every drop of stimulating fluid is utilized to its maximum potential. Advantages of Mini-Coil Tubing in Chemical Stimulation: High-Pressure Capability: The smaller diameter of our Mini-Coil Tubing allows for operations at significantly higher pumping pressures compared to traditional coiled tubing. This is particularly advantageous during chemical stimulation, where certain treatments require the application of fluids under substantial pressure to achieve optimal penetration and reaction within the reservoir. Precision in Fluid Placement: The precise placement of stimulation chemicals is crucial for the success of any treatment. Our Mini-Coil Tubing services ensure that the stimulation fluids are deposited exactly where needed, which is particularly beneficial in complex reservoirs or when targeting specific formation layers. Efficient Well Lifting: Post-stimulation, wells often require assistance to commence or resume production. The Mini-Coil Tubing is not only perfect for fluid delivery but also for well lifting operations, facilitating the transition from treatment to production smoothly and effectively. Tailored Operations: Understanding that flow rates and snubbing force are aspects where Mini-Coil Tubing has limitations, InWaTec Combined has optimized the design and operation of our Mini-Coil Services to maximize their strengths. Our team of experts can adjust operations to suit the specific conditions and requirements of each well, ensuring that the limitations are mitigated and the advantages are fully leveraged. InWaTec Combined’s Mini-Coil Services represent a fusion of innovation, precision, and efficiency. We bring this triad to every chemical stimulation project, ensuring that our clients' wells receive the most meticulous and effective treatment possible. By choosing InWaTec Combined for your chemical stimulation needs, you are opting for a partner dedicated to enhancing your well performance with cutting-edge solutions. Our Mini-Coil Services are a testament to our commitment to pushing the boundaries of what is possible in well intervention and stimulation. Experience the difference with InWaTec Combined’s Mini-Coil Services—where small-scale delivery meets large-scale impact, driving your wells towards maximum productivity.

KEY360 Inc offers a single integrated Business Management Platform comprising Business Intelligence, Project Management, Big Data & Analytics, ERP, Behaviour and Strategy Modification. - Over 140 Business and Project Management Systems on one platform available - Unique and extremely effective workflow engine - Remarkable “BIG DATA” and bulk transaction capability - Integrated Real Time reporting and dashboarding - Multi-company platform allows all project users to integrate seamlessly KEY Differentiators: - KEY360 Provides an exceptional opportunity for your organisation to attract new clients and build long terms relationships. - KEY360 is a Microsoft Gold Partner and Approved Microsoft Co-Sell Partner and can be purchased directly from the below online marketplaces: - Microsoft AppSource: KEY360 Capital Management Projects - Azure Marketplace: KEY360 Capital Management Projects - KEY360 is reputedly the most comprehensive and versatile Capital Project Management, Business Digitalization & Business Optimization solution available.

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.

Houston Digital Instruments (HDI) is proud to present the HDI 3300 Temperature Gauge System, a state-of-the-art intrinsically safe, certified, solid-state electronic temperature gauge. Designed to meet the demanding requirements of industries such as high-pressure nitrogen pumping, geothermal drilling, mud-based drilling, bulk liquid storage, well control manifolds, and flare stacks, this gauge system delivers accurate and reliable temperature monitoring in even the harshest conditions. Unmatched Accuracy and Reliability: When it comes to temperature monitoring, precision is paramount. With the HDI 3300 Temperature Gauge System, you can trust in its exceptional accuracy and reliability. Built on our legacy of excellence, each gauge system offers an impressive 0.5% accuracy of full scale, ensuring that you receive precise and trustworthy temperature readings for your critical operations. Flexible Temperature Ranges and Resolutions: The HDI 3300 accommodates a wide range of temperature requirements, offering temperature ranges up to 150 degrees Celsius or 300 degrees Fahrenheit. Whether you're working in extreme heat or sub-zero environments, our gauge system provides accurate measurements tailored to your specific needs. With a resolution of 0.1 degrees, you can closely monitor temperature changes and respond promptly to any variations, maintaining control and efficiency in your operations. Versatile and Easy to Use: We understand that every application is unique, which is why the HDI 3300 Temperature Gauge System offers a range of configuration options to suit your requirements. Choose from 4-20mA or 0-1 volt output, allowing seamless integration with your existing monitoring systems. The solid-state platform eliminates the need for fluids or moving parts, reducing maintenance requirements and ensuring long-lasting performance. With a simple interface for calibration, you can easily verify and fine-tune temperature measurements to maintain the highest level of accuracy. Designed for Safety and Convenience: Safety is our utmost priority at HDI. The HDI 3300 Temperature Gauge System is intrinsically safe, certified to meet Class 1, Division 1, Groups A, B, C, and D standards by CSA. Additionally, an optional ATEX certification, II 1 G, Ex ia IIC T4, is available to meet the specific requirements of your industry. The battery-powered system provides flexibility and portability, allowing you to monitor temperatures even in remote locations. A low battery indicator ensures you are always aware of the battery status, preventing any interruptions in monitoring. Customize Your Monitoring Experience: At HDI, we understand that every customer has unique needs. The HDI 3300 Temperature Gauge System offers configuration options to tailor the system to your specific preferences. Choose from 4-20mA output, externally powered options, and backlight capabilities to optimize your monitoring experience. Secondary displays are also available, allowing you to extend visibility and control across multiple locations. Trust Houston Digital Instruments: For over 30 years, Houston Digital Instruments has been a leader in providing cutting-edge measurement and monitoring solutions to industries worldwide. Our commitment to safety, accuracy, reliability, and low maintenance shines through in every product we offer. The HDI 3300 Temperature Gauge System is a testament to our dedication to delivering the highest quality solutions that meet the evolving demands of our customers. Experience precise temperature monitoring with the HDI 3300 Temperature Gauge System. Contact our expert team today to discuss your specific requirements and discover how HDI can elevate your operations to new heights. Trust HDI for safety, accuracy, and reliability. Where Precision Meets Performance - HDI, your partner in temperature monitoring excellence.

Discover Unmatched Illumination with Wisdom's KL12MS Corded Miner's Cap Lamp from Provix Introducing the Wisdom KL12MS Corded Miner's Cap Lamp, a cutting-edge lighting solution for the mining industry, proudly offered by Provix. This lamp is specifically designed to meet the challenging demands of underground mining, providing exceptional illumination, safety, and durability. Exceptional Lighting Performance The KL12MS is equipped with a robust 14,000mAh battery, guaranteeing up to 13 hours of continuous operation. It features a high-powered main light LED with a working voltage of 3.0V, current of 1080mA, and power of 3.24W. This results in a remarkable luminous flux of 512 lm and an extraordinary lighting degree of 28,000 lx, ensuring unparalleled visibility in the darkest environments. Durability and Longevity Built to last, the KL12MS boasts a main light life span of 50,000 hours and an auxiliary light life span of 40,000 hours. The battery life extends up to 1,200 cycles under typical working conditions, emphasizing reliability and longevity. Prioritizing Safety Your safety is our priority. The KL12MS is designed with explosion-proof features, conforming to ATEX GROUP II standards, and an IP68 waterproof rating. Its short circuit protection time of less than 320 μs further enhances its safety credentials, making it a trustworthy companion in any mining operation. Designed for Comfort and Ease of Use Weighing just 550g (19.40 oz), the KL12MS is comfortable for extended use. Its main cable length ranges from 1.4 to 1.65 meters (4.59 to 5.41 feet), offering flexibility and freedom of movement. The compact battery box, measuring 94 x 36 x 90 mm (3.7 x 1.4 x 3.5 in), ensures the lamp is not cumbersome during long shifts. Efficient Charging Capabilities The lamp's rechargeable via USB feature provides convenient and efficient charging. It takes only 5.5 to 10 hours to charge, minimizing downtime and maximizing productivity. Get in Touch for More Information Upgrade to the Wisdom KL12MS Corded Miner's Cap Lamp for enhanced visibility, safety, and efficiency in your mining operations. Visit Provix at our location, call us, or email sales@provix.net for more details. Explore our range of products at www.provix.net and experience the future of mining illumination with the Wisdom KL12MS.

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.

The WellStar® tubing-retrievable safety valve (TRSV) is a general production, hydraulically operated, downhole TRSV. The rugged hydraulic actuator of the WellStar safety valve provides durability and isolates the internal workings from well fluids through its unique construction. The metal-to-metal (MTM) sealing integrity in the body joints and closure mechanism places it in a premium valve category while featuring an economical price. Proven through years of installations, the simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions Features » Simple, compact design » Complete MTM well containment in the closed position (body/seat connections and flapper) » MTM flapper sealing (no resilient seal required) » Unique hydraulic actuation (single-piece piston/ flow tube) » Hydraulic chamber construction isolates the majority of the internal valve components and exposes them to clean hydraulic fluid » Positive debris barrier at both ends of flow tube in full open position » Maximized piston area and spring force » Flow tube construction prevents well solids and debris from settling on top of the piston *information referenced from supplier catalog.

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

Simplify Your Charging with the Wisdom USB Adapter – A Smart Solution from Provix Provix is excited to unveil the Wisdom USB Adapter, a cutting-edge charging accessory designed to enhance your charging experience. This magnetic USB charger features self-designed connectors that redefine convenience and efficiency in powering your devices. Innovative Magnetic USB Connectors The USB Adapter boasts unique magnetic USB connectors, specifically engineered for a seamless and secure connection. This design allows for quick and effortless attachment to your devices, ensuring a stable and consistent charge. The user-friendly nature of these connectors makes the charging process incredibly simple, even in less-than-ideal conditions or tight spaces. Versatile for Various Environments The Wisdom USB Adapter is designed to extend your charging capabilities across multiple settings. Whether you're at home, in the office, a hotel, or on the go, this adapter provides a reliable charging solution. Its white color and sleek design add a touch of elegance to your tech collection, making it a stylish and practical choice. Durable and High-Quality Construction Crafted with a focus on durability, the USB Adapter features a high-quality magnetic connector and a robust connecting cable. With a cable length of 1 meter, it offers the flexibility and reach needed in various charging situations. Effortless Charging Process Using the Wisdom USB Adapter is straightforward and efficient: 1. Connect the magnetic head to the multi-purpose lamp's charging interface. 2. Attach the USB connector end to a WISDOM power adapter or any standard USB port. This simple two-step process ensures your devices are charged without any hassle, keeping them ready for use whenever you need them. Ideal for Modern Professionals The Wisdom USB Adapter is a perfect match for professionals who require a reliable and efficient charging solution for their equipment. Its compatibility with various devices and ease of use make it an indispensable tool for miners, construction workers, and outdoor enthusiasts. Get Your Wisdom USB Adapter Today Embrace the convenience of the Wisdom USB Adapter, available now at Provix. Visit our website at www.provix.net to discover more about this innovative charging solution and explore our range of high-quality mining and construction equipment. Stay charged and ready with Wisdom's advanced technology.

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

When it comes to precise and reliable pressure measurement, the HDI 2021 Pressure Transmitter System sets the standard for excellence. Built with the high-quality components that HDI is renowned for, this intrinsically safe, certified, solid-state 4-20mA transmitter ensures exceptional performance in even the most demanding applications. Tailored to Your Needs: The HDI 2021 is available in a variety of configurations, allowing customers to specify the housing that best suits their unique application requirements. With customisation options at your disposal, you can trust that the transmitter will seamlessly integrate into your operational setup. Complete Assembly for Easy Installation: Delivered as a complete assembly, the HDI 2021 Pressure Transmitter System is ready for quick and hassle-free installation. We understand the value of your time, which is why we provide a comprehensive solution that saves you effort and resources. Unparalleled Safety and Reliability: All HDI Transmitters are designed to provide unmatched safety, accuracy, reliability, and low maintenance for our users. With the 2021 Pressure Transmitter System, you can have peace of mind knowing that it meets the highest industry standards and is built to last. Versatility for Various Applications: The HDI 2021 can be customized not only for pressure measurement but also for load, force, and torque applications across different industries. Whether you are in oil and gas, manufacturing, or any other field, our team can work with you to tailor the system to your specific needs. Certifications You Can Trust: The HDI 2021 Pressure Transmitter System boasts certifications that ensure compliance and performance. It is CSA certified as Intrinsically Safe Class 1, Division 1, Groups A, B, C, and D. Additionally, an optional ATEX certification (II 1 G, Ex ia IIC T4) is available for enhanced safety in hazardous environments. Key Features: • Field repairable system, minimizing downtime and reducing maintenance costs • Wide pressure range options, including 5,000 psi, 6,000 psi, 10,000 psi, 16,000 psi, and 20,000 psi • Multiple connection types, such as 2" 1502, 2" 2002, 2" 2202, or flanged connections, providing flexibility for installation • 4-20mA output available, ensuring compatibility with your existing systems • Solid-state platform with no fluids or moving parts, guaranteeing long-term reliability and accuracy Trust HDI for Unmatched Performance: When it comes to pressure measurement, the HDI 2021 Pressure Transmitter System stands out as the pinnacle of quality and precision. Contact our experienced team today to discuss your specific application requirements and experience the HDI advantage. With our unwavering commitment to excellence, we deliver solutions that meet your needs and exceed your expectations. Houston Digital Instruments - Your Partner in Precision Measurement.

Power Up Your Projects: Generator Set Leasing with CWB National Leasing Fuel Your Business Growth with Smart Equipment Leasing Solutions In the construction and industrial sectors, reliable power is non-negotiable. Generator sets play a crucial role in ensuring your operations run smoothly. Leasing your generator sets through Canadian Western Bank (CWB) National Leasing offers a flexible, financially smart solution that caters to your business needs. Here’s how leasing generator sets can energize your business operations: 1. Quick Equipment Access CWB National Leasing values your time and project deadlines. They ensure a swift review and decision on your lease application, typically notifying your equipment dealer about the payment within 48 hours of approval. This quick turnaround means you can have your generator sets delivered and operational promptly, minimizing any project delays. 2. Increased Financial Leverage Leasing with CWB National Leasing enhances your purchasing power. It enables you to acquire essential generator sets through manageable periodic payments rather than a significant upfront cost. This approach frees up capital for other business areas, and you can even add extra features or accessories to your generator sets with a slight increase in payments. 3. Optimized Cash Flow Management Manageable lease payments spread out over time mean your generator sets start contributing to your revenue even as you pay for them. This strategy helps maintain a healthy balance between your expenses and income, crucial for business stability and growth. 4. Flexible Payment Options CWB National Leasing offers tailored payment plans, including seasonal, semi-annual, or annual options, to match your business's revenue cycle. This flexibility is particularly beneficial for businesses with fluctuating income, ensuring payments align with your financial flow. 5. Potential Tax Advantages Leasing may provide tax benefits, as it allows you to expense lease payments rather than depreciating the capital cost of the generator sets. Consulting with a tax advisor can help you understand how leasing can optimize your business’s tax situation. Conclusion Choosing to lease your generator sets through CWB National Leasing is a strategic decision that equips your business with the necessary power infrastructure while maintaining financial agility. It ensures that you have the power support you need for your projects without the burden of a large upfront investment, paving the way for efficient operations, growth, and profitability in the demanding construction and industrial landscapes.

Spooling units designed to ensure cables or control lines are kept in tension while running in or out of hole. Our spooling units are fully designed, manufactured and assembled with sheaves (half or full moon) to guide control, injection, or mono-conductor cable preventing damage while being tripped in hole. Units are available in pneumatic, hydraulic, or electric drive and are ATEX zone and DNV certified as required by location. Spooling units can also be equipped with a filling pump to monitor pressure while tripping – improving efficiency as a sudden pressure drop indicates line damage.

Introducing the BPV (Back Pressure Valve) from Marlin Oil Tools: The Essential Safety Barrier for Coiled Tubing Operations in the Oil and Gas Industry Marlin Oil Tools is proud to present our BPV (Back Pressure Valve), a paramount downhole tool designed to enhance safety and operational integrity during well intervention tasks. Engineered with precision and reliability, the BPV is an indispensable component for maintaining control over well pressure and ensuring the protection of coiled tubing (CT) from potential hazards. Here's a detailed look at the BPV's design, functionality, and benefits, making it a must-have tool for any oil and gas operation. Key Features of the BPV (Back Pressure Valve): Directional Fluid Flow Control: The BPV is designed to allow fluid flow exclusively in one direction—downwards. This capability is crucial for preventing backflow and maintaining operational control during well intervention processes. Dual Flapper Valve System: Equipped with two duplicate cartridges featuring reliable flapper valves, the BPV offers an enhanced level of safety and redundancy. This double flapper back pressure valve system ensures that even if one valve encounters an issue, the other can continue to function effectively, providing an uninterrupted safety barrier. Comprehensive Well Pressure Control: The primary function of the BPV is to act as a safety barrier, preventing well fluids from entering the coiled tubing through the bottom of the Bore Hole Assembly (BHA). This function is vital for the safety of operations and the preservation of equipment integrity. Protection Against Mechanical Particles and Aggressive Environments: In addition to controlling well pressure, the BPV serves an auxiliary role in protecting the coiled tubing from mechanical particles and potentially aggressive well environments, such as those containing H2S and CO2. These elements can cause significant damage to the CT if allowed entry, making the BPV's protective capability critical for long-term equipment durability. Essential Tool for Every Job: Given its crucial safety and protective functions, the BPV is typically run on each well intervention job, underscoring its importance in the toolkit of downhole operations. Elevate your well intervention safety and efficiency with the BPV (Back Pressure Valve) from Marlin Oil Tools, a leading solution in oil and gas coiled tubing tools. Designed for downhole applications, the BPV features a double flapper valve system to ensure fluid flows only downwards, creating an effective barrier against well pressure. This safety essential prevents well fluid backflow into the CT, offering protection from mechanical particles and harsh environments like H2S and CO2. With dual reliable cartridges, the BPV is a critical component for every well intervention job, safeguarding both personnel and equipment by maintaining operational integrity and preventing damage from aggressive well conditions. Why Choose the BPV from Marlin Oil Tools? Unparalleled Safety and Control: Provides a reliable safety barrier for well pressure control, crucial for operational safety. Dual Valve Redundancy: Ensures continued operation and safety even if one valve fails, thanks to its double flapper valve design. Comprehensive Protection: Guards coiled tubing against mechanical damage and corrosion from aggressive well environments. Operational Necessity: An indispensable tool for every well intervention job, highlighting its importance in maintaining a safe and efficient operation. The BPV (Back Pressure Valve) by Marlin Oil Tools represents the pinnacle of safety and efficiency in coiled tubing operations within the oil and gas industry. Incorporate the BPV into your operations to ensure the highest standards of safety and equipment integrity. Contact Marlin Oil Tools today to learn more about how our innovative solutions can support your operational needs.

Let Sunkers Marine arrange all your marine needs with our network of service providers.

Elevate Power Management with DAKAR: The Future of Energy Efficiency At ELEKS, we're committed to revolutionizing the energy industry with innovative software solutions that empower businesses to thrive in the digital age. Introducing DAKAR, our cutting-edge power management system designed to enhance operational efficiency, minimize errors, and transform the way energy is managed. DAKAR has become the preferred choice for numerous European energy producers, distributors, utilities providers, design organizations, and educational institutions, and for good reason. Unleash the Power of DAKAR Seamless Integration: DAKAR seamlessly integrates into any power industry organization, ensuring a smooth transition to advanced power management solutions without disrupting your existing workflows. Comprehensive Capabilities: Experience extensive capabilities for utilities network management, modeling, and planning. DAKAR empowers you to optimize your power networks, ensuring they operate at peak efficiency while adapting to both traditional and renewable energy sources. Enhanced Accuracy and Reliability: With DAKAR by your side, you can elevate the accuracy and reliability of your power systems. Our software empowers you to make informed decisions based on real-time data, leading to reduced errors and improved performance. Real Results, Real Numbers Impressive Customer Base: With a track record of success, DAKAR is trusted by 250 customers across diverse industries. From energy suppliers to educational institutions, businesses worldwide rely on DAKAR for streamlined power management. Leading Ukrainian Energy Suppliers: In Ukraine, where the energy landscape is evolving rapidly, DAKAR stands out as the software of choice for 2/3 of energy suppliers. Its impact on efficiency and productivity is undeniable. 40% Productivity Growth: Businesses using DAKAR have experienced a remarkable 40% growth in productivity. This tangible result speaks volumes about the transformative power of our software in enhancing operational efficiency. ELEKS: Pioneering Energy Innovation For over three decades, ELEKS has been at the forefront of technology and innovation, creating solutions that drive industries forward. DAKAR embodies our commitment to shaping the energy industry for the better, providing unparalleled tools to manage power systems with accuracy and precision. Experience the Future of Power Management Embrace the future of power management with DAKAR by ELEKS. Join the ranks of satisfied customers who have unlocked efficiency, minimized errors, and achieved remarkable growth. Elevate your operational efficiency and take control of your energy systems like never before. With DAKAR, the future is bright, sustainable, and powered by cutting-edge technology.

Cross coupling protectors are essential tools used in the oil and gas industry during the installation of completions in oil and gas wells. These protectors provide a variety of benefits that make them a necessary investment for any oil and gas company. Protects Control Lines: Cross coupling protectors help protect control lines from damage that can be caused by the installation process, environmental factors, and other external factors. By providing an extra layer of protection, the control line can last longer and reduce the need for costly repairs or replacements. Prevents Fluid Contamination in Cables: Cross coupling protectors prevent fluid contamination by keeping debris and other unwanted materials out of electrical cables during installation. This is particularly important in the oil and gas industry where contamination can lead to significant safety risks, equipment damage, and production losses. Reduces Maintenance Costs: The installation of cross coupling protectors can help reduce maintenance costs. By protecting control lines and cables the completion is less likely to require maintenance or repair. This can result in significant cost savings over the long-term. Improves Efficiency: Cross coupling protectors help to improve the efficiency of the installation process. By providing a secure connection and preventing contamination, the installation process can be completed more quickly and with fewer re-work. This can help to reduce downtime and increase productivity. Enhances Safety: Cross coupling protectors enhance safety by reducing the risk of equipment failure and fluid contamination. This can help to prevent accidents and injuries, and ensure that the installation process is completed safely. The use of cross coupling protectors is critical to the successful installation of tubing in oil wells. They provide numerous benefits including protecting tubing joints, preventing fluid contamination, reducing maintenance costs, improving efficiency, and enhancing safety. By investing in cross coupling protectors, oil and gas operators can ensure the long-term success of their operations while improving their bottom line.

Seamless Zone Isolation: InWaTec Combined’s E-line Bridge Plug Setting Services In the complex operations of oil and gas extraction, the ability to isolate zones within the wellbore is critical for effective production management and intervention. InWaTec Combined offers specialized E-line Bridge Plug Setting Services, utilizing state-of-the-art tools to achieve precise zonal isolation with both permanent and retrievable bridge plug options. Bridge plugs are essential elements in completion hardware, designed to provide robust seals both above and below the production tubing within the casing, liner, or wellbore wall. Their primary function is to isolate certain sections of the well, which is especially beneficial in wells with multiple producing zones or when specific zones need to be temporarily sealed off during interventions. Permanent Bridge Plugs: These are typically favored for their cost-effectiveness and superior sealing and gripping capabilities. Once set, they provide a dependable barrier, with metal slips or "slips" that anchor into the casing's inner diameter using sharpened, carburized teeth. The seal is completed with large cylindrical rubber elements, and in high-pressure environments, metal rings enhance the seal by preventing rubber extrusion. Retrievable Bridge Plugs: These plugs are the go-to solution when flexibility is required, such as during secondary recovery operations, well re-completions, or when there's a need to change out production tubing. Though they may have lower sealing and gripping capabilities compared to permanent options, their design allows for removal and reuse, providing significant operational versatility. Our E-line Bridge Plug Setting Services deploy these tools with precision. The plug is conveyed into the well via wireline—a method that provides real-time depth control and selectivity. Once at the target depth, an axial load is applied to the bridge plug to initiate the expansion of the slips and rubber elements, creating a secure seal against the casing. The setting mechanism can be activated hydraulically, mechanically, or with a controlled chemical charge, depending on the well conditions and client requirements. InWaTec Combined’s expertise ensures that the most appropriate setting method is chosen for each operation, considering the well's pressure environment, the desired duration of the plug setting, and the future plans for the well. By opting for InWaTec Combined’s E-line Bridge Plug Setting Services, operators benefit from a service that combines reliability with adaptability. Our commitment to leveraging advanced technologies with expert execution means that your well operations can proceed with confidence, knowing that each zone is isolated with the utmost precision. InWaTec Combined is dedicated to providing solutions that enhance operational efficiency and well integrity. Whether you require a permanent solution for long-term isolation or the flexibility of a retrievable plug for short-term interventions, our E-line Bridge Plug Setting Services are designed to meet your needs with precision, reliability, and cost-effectiveness.