Tubing Hanger 2 3/8

Streamline Your Downhole Operations with HOCA Oil Tools' Internal Fishing Neck Pulling Tools In the constantly evolving oil and gas industry, having the right tools for specific downhole tasks can significantly enhance operational efficiency and safety. HOCA Oil Tools specializes in providing such solutions, and our Internal Fishing Neck Pulling Tools are a prime example. These tools are meticulously engineered for the safe and efficient retrieval of downhole equipment, ensuring operations proceed smoothly without unnecessary downtime or risk. HOCA's Internal Fishing Neck Pulling Tools: Engineered for Precision and Reliability Designed to latch onto internal fishing necks of downhole tools and equipment, HOCA Oil Tools' Internal Fishing Neck Pulling Tools offer unmatched precision and reliability. These tools are integral for the retrieval process, providing a secure grip without damaging the wellbore or the equipment being retrieved. Constructed from high-quality materials and designed to meet rigorous industry standards, our pulling tools ensure successful operations under a variety of downhole conditions. Experience the Difference with HOCA Oil Tools Choosing HOCA Oil Tools’ Internal Fishing Neck Pulling Tools means opting for a blend of quality, innovation, and support designed to meet the specific needs of modern downhole operations. Our commitment to excellence ensures that our tools not only meet but exceed the rigorous demands of the oil and gas industry. Integrating our Internal Fishing Neck Pulling Tools into your downhole operations translates into enhanced efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, you gain more than just a supplier; you gain a partner dedicated to your success, offering cutting-edge solutions and unparalleled service. Opt for HOCA Oil Tools for your downhole needs and join the ranks of satisfied clients who trust our Internal Fishing Neck Pulling Tools for their critical operations. Elevate your downhole performance with HOCA Oil Tools – where technology, innovation, and reliability converge to drive success.

The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog.

Maximizing Downhole Efficiency with HOCA Oil Tools' Pump Thru Plugs In the dynamic realm of oil and gas operations, efficiency and reliability are paramount for ensuring the success and safety of downhole activities. HOCA Oil Tools, a pioneer in the field of downhole slick line tools, is proud to present its innovative Pump Thru Plugs, designed to meet the unique challenges faced by the industry. Tailored for seamless integration into well operations, our Pump Thru Plugs stand as a testament to our commitment to enhancing downhole efficiency and well integrity. HOCA’s Pump Thru Plugs: Engineered for Enhanced Downhole Operations Our Pump Thru Plugs are meticulously crafted to provide operators with a reliable solution for isolating sections of the well while maintaining the ability to pump fluids through the plug. This dual functionality is essential for a variety of downhole operations, from well treatments to testing phases. Built from high-grade materials and engineered to withstand the harsh conditions of the downhole environment, HOCA’s Pump Thru Plugs ensure durability, reliability, and performance. Experience the HOCA Oil Tools Difference Opting for HOCA Oil Tools’ Pump Thru Plugs means choosing a product backed by innovation, quality, and a deep understanding of downhole challenges. Our commitment to providing high-quality downhole solutions ensures that our products not only meet but exceed the operational demands of the modern oilfield. By incorporating our Pump Thru Plugs into your downhole toolkit, you are taking a step towards enhanced operational efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, you gain more than just a supplier; you gain a partner dedicated to supporting your downhole challenges with cutting-edge solutions and comprehensive service. Choose HOCA Oil Tools for your downhole needs and leverage the advantages of our Pump Thru Plugs to optimize your operational outcomes. Partner with us and elevate your downhole operations to new levels of success and efficiency. With HOCA Oil Tools, empower your downhole activities with tools that redefine industry standards for efficiency, safety, and performance in the demanding world of oil and gas extraction.

ARC Coiled Tubing Connector | Anti-Rotational Roll-On Tool | Marlin Oil Tools The ARC (Anti-rotational internal Roll-on Connector) from Marlin Oil Tools serves as the essential link between the smooth lower end of coiled tubing (CT) and any downstream downhole tool required for well intervention projects in the oil and gas industry. Featuring a unique design, the ARC seamlessly connects the smooth-walled CT with the threaded interface of downhole tools, ensuring efficient and reliable operations in challenging wellbore environments. Key Features: Three grooves in the upper part of the connector facilitate the secure attachment and rolling of the coiled tubing, enhancing stability and operational performance. The lower part of the ARC is equipped with a threaded interface, enabling seamless connection with various downhole tools featuring connecting threads. O-rings positioned below the grooves provide a robust barrier, effectively sealing against in-line working pressures and preventing leaks during operations. A strategically placed slot along the grooves offers a significant advantage, allowing for the internal welding seam of the coiled tubing to be securely locked during connector installation. This anti-rotational feature ensures the stability of the connector and minimizes the risk of rotation during operation. The ARC Coiled Tubing Connector from Marlin Oil Tools is engineered to deliver exceptional performance, reliability, and sealing capabilities in oil and gas coiled tubing applications. Experience enhanced efficiency and confidence in your well intervention projects with the ARC connector from Marlin Oil Tools.

Introducing Safe-T-Whip™ Continuous HD-Short 7’ (SW-HD-04-S): Uncompromising Safety for Heavy Duty Short Restraint Applications At Safe-T-Whip & Restraints Inc., safety is our top priority. We are excited to introduce our latest innovation - the Safe-T-Whip™ Continuous HD-Short 7’. Specially designed for heavy-duty applications that require a shorter restraint, this safety whip offers unparalleled protection and reliability for pressurized pipe fittings in the oilfield. Unmatched Heavy Duty Design: Identified by its striking red color and accompanied by an orange tag, SW-HD-04-S Safe-T-Whip™ Continuous HD-Short 7’ is meticulously crafted from robust 3/4" 12-Strand HMPE fiber. This heavy-duty safety restraint is engineered for use on 3-inch 1502 hammer union pipelines up to an impressive 15,000psi or 4-inch iron up to 10,000psi. When you need a shorter restraint for heavy-duty applications, trust Safe-T-Whip™ Continuous HD-Short 7’ to deliver. Enhancing Safety with Continuous Restraints: The Safe-T-Whip™ Continuous HD-Short 7’ is an integral part of our safety restraint system, designed to contain uncontrolled movement on both sides of a pipe union during sudden and total failure. By creating a choke on either side of a potential rupture, it effectively reduces in-line flowline movement as well as lateral movement, mitigating dangerous impacts. Engineered for Maximum Protection: The Safe-T-Whip™ Continuous system offers end-to-end restraint of flowlines for all lengths of pipe sections, swivels, and joints. Each section is secured by both the upstream and downstream sections of the flowline, ensuring comprehensive protection in the event of failure. Proper evaluation of the piping system is crucial to ensure adequate anchoring both upstream and downstream, enhancing safety. Certified for Uncompromising Quality: Safety is paramount, and that's why all Safe-T-Whip™ Restraints and Anchors undergo rigorous testing and certification to meet the highest industry standards. Our commitment to quality ensures that you receive a safety restraint system you can trust. Versatility and Flexibility: The Safe-T-Whip™ Continuous HD-Short 7’ is designed for use on 2, 3, and 4-inch iron 1502 hammer union pipes, with recommended pressures ranging from 2,000psi to 15,000psi. Its versatility makes it ideal for various flowline configurations, ensuring superior protection for your heavy-duty operations. Enhanced Flowline Safety: Once installed correctly, the Safe-T-Whip™ Continuous HD-Short 7’ is designed to limit unsafe flowline movement throughout the entire linear series of a flowline. With Safe-T-Whip™ Continuous HD-Short 7’, you can rest assured that your heavy-duty operations are safeguarded from catastrophic failures. The Ultimate Heavy Duty Safety Restraint: SW-HD-04-S Safe-T-Whip™ Continuous HD-Short 7’ is the ultimate safety restraint for heavy-duty short applications. Keep your operations safe with Safe-T-Whip & Restraints Inc., your trusted partner in safety.

Industrial Cleaning with the 4-Litre EnviroBlu: The Future of Efficiency and Sustainability At Mekapisk EnviroBlu Solutions Inc., we believe in pushing the boundaries of what’s possible in industrial cleaning. Imagine a cleaner that’s tough enough to handle the biggest jobs yet compact enough to manage with ease. Introducing our 4-litre EnviroBlu cleaner—a marvel of engineering designed to transform your cleaning routine. This isn’t just a cleaner; it’s a revolution in how we approach maintenance and sustainability. The Power of EnviroBlu Efficiency and Speed In an industry where time is money, every second counts. EnviroBlu’s advanced aqueous surfactant technology penetrates dirt and grime at the molecular level, ensuring a quick and thorough clean. Whether you’re dealing with industrial machinery, large equipment, or expansive surfaces, EnviroBlu makes the job faster and easier. Imagine cutting your cleaning time in half—that’s the power of EnviroBlu. Cost Savings Efficiency isn’t just about speed; it’s also about reducing costs. EnviroBlu’s potent formula means you use less product to achieve superior results. This translates to significant cost savings over time. Our 4-litre size is perfect for big cleaning jobs, providing enough product to tackle extensive tasks without the need for frequent resupply. Lower product usage, less downtime, and fewer purchases—all adding up to a healthier bottom line. Environmental Stewardship We’re living in a time when environmental responsibility is not just an option but a necessity. EnviroBlu’s water-based, non-toxic, phosphate-free formula is designed to be safe for both people and the planet. This isn’t just about cleaning; it’s about preserving our environment for future generations. By choosing EnviroBlu, you’re making a powerful statement about your commitment to sustainability. Why the 4-Litre Size is a Game Changer Big Jobs, Easy Handling The 4-litre EnviroBlu bottle is designed to strike the perfect balance between capacity and manageability. It’s large enough to handle extensive cleaning tasks but compact enough to be easily handled and stored. This means you get the power of an industrial-strength cleaner in a size that’s practical for everyday use. Versatility From heavy-duty industrial equipment to everyday residential cleaning, EnviroBlu’s versatility makes it an indispensable tool. Its powerful cleaning action is perfect for a wide range of applications, including: • Industrial machinery and equipment • Vehicles and heavy-duty trucks • Large commercial spaces • Residential areas, including kitchens and bathrooms Certified Safe EnviroBlu is certified food safe by the Canada Food Inspection Agency (CFIA) and is a recognized Green Marine Partner. This ensures that our product is safe to use in diverse environments, including food processing areas and maritime industries. You can clean with confidence, knowing you’re meeting the highest safety standards. Directions for Use Smaller, Less Soiled Areas: 1. Mix water with EnviroBlu as per the required dilution ratio. 2. Spray the mixed solution directly on the surface. 3. Wipe the area with a dry cloth. Larger, Heavily Soiled Areas (Without Power Washer): 1. Pre-rinse the affected area with water. 2. Spray EnviroBlu directly on the target area and let it work for 1-3 minutes. 3. Brush the area if necessary. 4. Rinse thoroughly with water. 5. Repeat if the area has not been cleaned recently. Larger, Heavily Soiled Areas (With Power Washer): 1. Spray the area with a water jet only. 2. Introduce EnviroBlu into the power washer. 3. Rinse with straight water. Stay Green, Go Blu! Choose the 4-litre EnviroBlu for your big cleaning jobs. Experience the unmatched efficiency, cost savings, and environmental stewardship that only EnviroBlu can provide. Let’s transform the way we clean and build a more sustainable future together.

Ensuring Continuity with InWaTec Combined’s Electric Line Pipe Recovery Services In the dynamic arena of oil and gas extraction, the unexpected is the only constant. One of the most formidable challenges that can grind operations to a halt is the dreaded scenario of a stuck drill string. Recognizing the critical need for swift and effective resolution, InWaTec Combined offers specialized Electric Line Pipe Recovery Services, designed to address and rectify such downhole dilemmas. When a drill string becomes lodged downhole, it is not just an obstacle; it represents a halt in production, potential damage to resources, and a significant operational cost. InWaTec Combined's Electric Line Pipe Recovery Services are the answer to this industry-wide challenge. Our services employ advanced wireline technology, leveraging the power of electric lines to deliver targeted interventions that free the stuck pipe. Our approach to pipe recovery combines precision-engineered tools with real-time data transmission capabilities. This dual advantage enables our skilled operators to assess the situation accurately and execute recovery procedures with minimal risk to the wellbore or the environment. By integrating our electric line expertise with our pipe recovery operations, we ensure that your drill rig can return to its primary function with minimal downtime. The electric lines play a crucial role; they not only serve as a conduit for the necessary tools to navigate the wellbore but also provide a continuous stream of data back to the surface. This data is critical for making informed decisions during the recovery process, allowing for adjustments and interventions that are precise and situation-specific. At InWaTec Combined, we understand that time is of the essence in such operations. Our Electric Line Pipe Recovery Services are designed for rapid deployment and execution, ensuring that your operations can swiftly transition from a state of suspension to full productivity. Our commitment to innovation, safety, and efficiency is unwavering, as we strive to provide solutions that minimize operational disruptions and maintain the integrity of your wellbore. In the face of stuck pipe challenges, you can count on InWaTec Combined to deliver not just services, but solutions that propel your operations forward. Trust in our expertise to navigate the complexities of downhole recovery, ensuring that your operations remain resilient and robust, no matter what obstacles lie beneath.

MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer

Unlock Financial Freedom with Dunbridge Financial's Personal Services Are you tired of hidden fees and complicated financial services that leave you feeling overwhelmed and uncertain about your money? Look no further! Dunbridge Financial is here to revolutionize the way you manage your personal finances. With our commitment to live rates, uncompromising security, and ease of use, we are your gateway to financial freedom. Live Rates with No Hidden Fees At Dunbridge Financial, we believe in complete transparency. What you see is what you get - no hidden fees, no surprises. Access our live exchange rates and take control of your money like never before. With us, you can rest assured that you're getting the most value out of every transaction. Security Is Our Priority Your financial well-being is of utmost importance to us. With Dunbridge Financial, your funds and data are in safe hands. We partner with payment service providers compliant with ISO27001, ensuring that your client funds are managed securely and with the utmost care. Enjoy peace of mind knowing that your financial interests are protected. Easy to Use, Easy to Save We believe that managing your money should be a breeze. That's why our personal financial service is designed with simplicity in mind. Sending money to over 100 countries is quick and effortless. Just choose your destination, lock in your rate, and you're done - it's as easy as that. Foreign Investment Management - Your Gateway to Global Opportunities At Dunbridge Financial, we go beyond simple money transfers. We offer a wide range of foreign investment management options, catering to your diverse financial needs. Here's how we can help you unlock global opportunities: 1. Manage Investments from Abroad: Handle your investments in your home country, even when you're residing abroad. Our platform empowers you to stay connected and make informed investment decisions regardless of your location. 2. Explore Offshore Investments: Diversify your investment portfolio with offshore opportunities. Our secure and compliant processes ensure that your international currencies are managed efficiently and effectively. 3. Pay Your Mortgage Abroad: Dreaming of a vacation villa or an investment property in another country? Dunbridge Financial makes it hassle-free to pay your mortgage in a different currency, turning your aspirations into reality. 4. Flexible Payment Options: Enjoy the flexibility of having your pay and expenses paid in your preferred currency. No more worries about currency fluctuations affecting your financial plans. Why Choose Dunbridge Financial? Dunbridge Financial is more than just a financial service provider. We are your trusted partner, dedicated to simplifying your financial journey and maximizing your opportunities. With us, you'll experience: • Cutting-edge technology for seamless financial transactions • Personalized support from our expert team, ensuring your needs are met • Secure and compliant processes for your peace of mind Join Us Today and Embrace Financial Freedom Discover the power of transparent, secure, and efficient financial services with Dunbridge Financial. Take control of your personal finances, explore global investment opportunities, and embrace a world of possibilities. Whether you're managing investments from abroad or making international money transfers, we are your reliable partner every step of the way. Unlock your financial freedom with Dunbridge Financial. Sign up today and experience a new era of financial empowerment.

Introducing Safe-T-Whip™ Continuous HD-Long 14’-8” (SW-HD-04-L): Unmatched Safety for Heavy Duty Long Restraint Applications At Safe-T-Whip & Restraints Inc., safety is at the core of everything we do. We are thrilled to present our latest breakthrough - the Safe-T-Whip™ Continuous HD-Long 14’-8”. Specially designed for heavy-duty applications that require a longer restraint, this safety whip offers unparalleled protection and reliability for pressurized pipe fittings in the oilfield. Unparalleled Heavy Duty Design: Distinguished by its striking red color and proudly adorned with a red tag, SW-HD-04-L Safe-T-Whip™ Continuous HD-Long 14’-8” is crafted with precision from robust 3/4" 12-Strand HMPE fiber. This heavy-duty safety restraint is engineered for use on 3-inch 1502 hammer union pipelines up to an impressive 15,000psi or 4-inch iron up to 10,000psi. When you need a longer restraint for heavy-duty applications, trust Safe-T-Whip™ Continuous HD-Long 14’-8” to deliver. Enhancing Safety with Continuous Restraints: The Safe-T-Whip™ Continuous HD-Long 14’-8” is an essential component of our safety restraint system, designed to contain uncontrolled movement on both sides of a pipe union during sudden and total failure. By creating a choke on either side of a potential rupture, it effectively reduces in-line flowline movement as well as lateral movement, mitigating dangerous impacts. Engineered for Maximum Protection: The Safe-T-Whip™ Continuous system offers end-to-end restraint of flowlines for all lengths of pipe sections, swivels, and joints. Each section is secured by both the upstream and downstream sections of the flowline, ensuring comprehensive protection in the event of failure. Proper evaluation of the piping system is crucial to ensure adequate anchoring both upstream and downstream, enhancing safety. Certified for Uncompromising Quality: Safety is our highest priority, and that's why all Safe-T-Whip™ Restraints and Anchors undergo rigorous testing and certification to meet the highest industry standards. Our commitment to quality ensures that you receive a safety restraint system you can trust. Versatility and Flexibility: The Safe-T-Whip™ Continuous HD-Long 14’-8” is designed for use on 2, 3, and 4-inch iron 1502 hammer union pipes, with recommended pressures ranging from 2,000psi to 15,000psi. Its versatility makes it ideal for various flowline configurations, ensuring superior protection for your heavy-duty operations. Enhanced Flowline Safety: Once installed correctly, the Safe-T-Whip™ Continuous HD-Long 14’-8” is designed to limit unsafe flowline movement throughout the entire linear series of a flowline. With Safe-T-Whip™ Continuous HD-Long 14’-8”, you can rest assured that your heavy-duty operations are safeguarded from catastrophic failures. The Ultimate Heavy Duty Safety Restraint: SW-HD-04-L Safe-T-Whip™ Continuous HD-Long 14’-8” is the ultimate safety restraint for heavy-duty long applications. Keep your operations safe with Safe-T-Whip & Restraints Inc., your trusted partner in safety.

The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog.

Houston Digital Instruments (HDI) is proud to present the 1000P Pressure Gauge System, a versatile and dependable solution designed to meet your pressure measurement needs. Built on our 30-year field-proven platform, this intrinsically safe, solid-state electronic gauge is the go-to choice for applications requiring accurate readings, even in high vibration and rugged environments. Unmatched Readability and Durability: The 1000P Pressure Gauge System is engineered to deliver clear and reliable pressure readings, regardless of lighting conditions. Our innovative design ensures that the gauge remains easily readable, providing crucial information at the point of measurement. Whether you require a primary or secondary readout, the 1000P delivers consistent performance, making it the ideal choice for critical operations. Exceptional Accuracy and Range: At HDI, accuracy is our priority. The 1000P offers pressure ranges up to 20,000 psi, providing the versatility to meet a wide range of application requirements. With an accuracy of 0.50% of full scale, you can trust that your pressure measurements are precise and reliable. Benefit from our extensive experience as the 1000P has been successfully deployed in the field for over 10 years, proving its performance and durability. Designed for Efficiency and Ease of Use: We understand the importance of simplicity and convenience. The 1000P Pressure Gauge System is powered by batteries, eliminating the need for external power sources and ensuring hassle-free operation. The field repairable system minimizes downtime and reduces maintenance costs, allowing you to focus on your operations with confidence. A low battery indicator keeps you informed of the system's power status, ensuring uninterrupted performance when it matters most. Tailored to Your Application: The 1000P can be utilized in various applications with different connection types, providing flexibility and adaptability to meet your specific needs. Choose from 2" 1502, 2" 2002/2202, flanged, or nut connections, ensuring seamless integration with your existing systems. Our team of experts is ready to assist you in selecting the optimal configuration for your application, ensuring the best performance and compatibility. Quality You Can Trust: HDI is synonymous with safety, accuracy, reliability, and low maintenance. The 1000P Pressure Gauge System upholds these qualities, providing you with peace of mind and enabling efficient and effective pressure monitoring. We are committed to delivering products that withstand the test of time and provide consistent performance in demanding environments. Expand Your Measurement Capabilities: Upgrade your pressure measurement capabilities with the 1000P Pressure Gauge System. Benefit from its reliable performance, durability, and ease of use. Whether you require primary or secondary readouts, this gauge system is designed to meet your needs with unmatched accuracy and versatility. Contact Houston Digital Instruments today to discuss your specific application requirements. Our team of experts is ready to assist you in selecting the ideal solution for your pressure measurement needs. Trust HDI for excellence in measurement and monitoring solutions. Together, we'll achieve efficiency, safety, and success.

Unleash Precision Welding with Canaweld's TIG Torch 200 AMP Gas Valve Air Cooled (26 Series)! For the oil and gas industry, precision welding is not just a requirement; it's an art. At Canaweld, we understand the critical role that welding plays in your projects, and that's why we offer the highest quality welding accessories to empower you with exceptional performance. Our TIG Torch 200 AMP Gas Valve Air Cooled (26 Series) is a testament to our commitment to excellence and innovation. Unmatched Flexibility: When it comes to hard-to-reach applications, our TIG Torch 200 AMP is the ultimate solution. The torch body can be bent to virtually any position, ensuring quick and easy access to even the most difficult positional welds. No more struggling with tight spaces; our torch provides unmatched flexibility, making precision welding a breeze. Revolutionary Cooling Technology: We've harnessed the power of Force Cooling Technology to maximize the performance and longevity of our torch. Highly effective passages and wells force cool the collet, resulting in a cooler running torch with increased conductivity and extended consumable life. Weld with confidence, knowing that our torch can handle even the most demanding applications. Heat Zone Isolation for Superior Performance: Our torch employs Heat Zone Isolation Technology, where transferred heat is isolated by a unique external barrier. Conducted heat is further isolated using large air pockets within the torch body structure. The result? Cooler running torches with increased power to weight performance ratios. Experience welding at elevated power levels without compromising performance. Superior Wear Parts for Increased Arc Time: Every component of our torch is designed for superior performance, delivering increased arc time and lower overall production costs. From push-on/easy grip ceramics to one-piece collet/collet body for hassle-free use, our torch ensures 100% ceramic and electrode alignment with the Heat Zone Isolator. Optional large gas lens increases the gas envelope for even more efficiency. Advanced Torch Bodies and Back Caps: Experience a step-change in performance levels with our torch bodies and back caps. Our revolutionary cooling and heat zone isolation techniques result in cooler running torch bodies at elevated power levels. These cooler running components increase wear parts' life expectancy, giving you an edge in productivity. Key Benefits for Enhanced Performance: • Utilizes air gap technology for cooler running handles • Hard and soft material elements for an effortless grip • Infinite adjustment of welding parameters from the torch handle • Optional integrated handle readout displays all welding and machine parameters in "real-time" Clever Cable Systems for Optimal Efficiency: Our cable systems are cleverly designed to combine flexibility, durability, and top-notch performance. Rapid fit and modular rear-end systems ensure easy reconfiguration of power input, gas hose, and control lead terminations. Superior-grade rubbers guarantee cable termination integrity and hose package longevity, tested to withstand over 1 million flexes. Elevate Your Welding Experience: Experience the difference with Canaweld's TIG Torch 200 AMP Gas Valve Air Cooled (26 Series). Achieve precision welding with ease, no matter how challenging the application. Trust in Canaweld's expertise and dedication to deliver premium welding accessories that redefine excellence in the industry. Your welding projects deserve nothing but the best, and that's precisely what Canaweld delivers. When it comes to welding, choose Canaweld for the ultimate in quality, flexibility, and performance. Elevate your welding experience and take your oil and gas projects to new heights of success with Canaweld's cutting-edge welding accessories.

Enhancing Well Efficiency: InWaTec Combined’s Precision E-line Packer Setting Services The backbone of any well’s structural integrity and operational efficiency lies in the strategic placement and setting of production packers. InWaTec Combined’s E-line Packer Setting Services provide meticulous installation of these critical components, ensuring an optimal seal and isolation within your wellbore. A production packer is not just a piece of hardware; it’s a guardian that ensures the separation of production zones, safeguards the casing from pressure, and enhances the overall management of the well. Our E-line Packer Setting Services cater to both production and service packer requirements, providing versatile solutions tailored to the unique challenges of your well operations. Production Packers: These remain in place during well production, set above the top perforations or sand screens. They are pivotal in multi-zone reservoirs, where they isolate perforations for each zone, allowing for selective production through the use of sliding sleeves. Service Packers: Employed temporarily during well servicing tasks like cement squeezing, acidizing, fracturing, and well testing, service packers are essential for the precise and safe execution of these operations. Packers are designed with a keen eye on reliability—metal slips and rubber elements, or metal rings in high-pressure scenarios, ensure a firm grip and seal against the casing ID. Our E-line Packer Setting Services employ the latest in axial load technology, whether hydraulic, mechanical, or chemical, to expand and secure these packers at the optimal depth. For permanent well configurations, our permanent packers offer a cost-effective and robust solution, boasting superior sealing and gripping capabilities. When retrievability is key, our retrievable packers provide flexibility for secondary recoveries, re-completions, or production tubing changes, with designs that ensure ease of removal and the possibility of reuse after servicing. InWaTec Combined’s commitment to excellence in E-line Packer Setting Services is unwavering. We provide not only the tools but also the strategic foresight and technical support to ensure that your packer installation enhances well performance, maintains integrity, and supports your production goals. Partner with InWaTec Combined for your packer setting needs and experience the assurance that comes from precision, durability, and adaptability. Our services are designed to secure your well’s future, one packer at a time.

HOCA Oil Tools B.V.'s Expertise in Slickline Rope Sockets In the dynamic world of oil and gas extraction, precision and reliability are paramount. At HOCA Oil Tools B.V., we take pride in our extensive expertise in slickline operations, particularly our specialized rope sockets designed for varied downhole conditions. Our product range includes Type ‘AO’, ‘AD’, ‘AS’, ‘BO’, ‘BD’, ‘BS’, ‘CO’, ‘CD’, ‘CS’,‘CGO’, ‘D’, ‘DD’, ‘DS’, ‘GO’, ‘RC’, ‘SA’, ‘HO’, and ‘HD’ rope sockets, each tailored for specific wireline tasks and environmental conditions. Our rope sockets are crafted from high-quality alloy materials, ensuring durability and optimal performance. They cater to a wide range of wire sizes and types, accommodating single-strand, multi-strand, and encapsulated lines. With features like spring disc supports, releasing slips, and heavy-duty clamps, our rope sockets ensure secure connections and safe operations under intense downhole pressures. The main features of some of the various rope sockets offered by HOCA Oil Tools B.V. are as follows: Type ‘CGO’ Rope Socket: Designed for use with small stranded lines up to 1/4” diameter, this rope socket has an additional swivel bottom, making it similar in design to the Type ‘CO’ but with enhanced functionality for specific applications requiring rotation. Type ‘D’ Dummy Rope Socket: Available with threaded or QLS Connections, this tool can be attached to other types of tools with a pin connection for various wireline applications, offering great versatility and adaptability in operational setups. Type ‘GO’ Rope Socket: Engineered specifically for single conductor cable heads, providing secure and reliable connections for specialized wireline operations. Type ‘RC’ Rope Socket: This assembly is tailored for encapsulated line applications, offering enhanced protection and durability for operations involving encapsulated cables. Type ‘SA’ Rope Socket: Designed for swabbing applications with Babbitt fill, this rope socket is tailored for operations requiring the retrieval of fluids from wells, ensuring efficient and reliable performance. Type ‘HO’ and ‘HD’ Heavy Duty Rope Socket: These are intended for heavy-duty wireline work and feature a unique design that traps the wire, held in place with socket screws, suitable for more demanding operations and environments. Each type of rope socket has unique features tailored to different wireline operations, ensuring that HOCA Oil Tools B.V. can provide a suitable solution for a wide range of downhole conditions and requirements. HOCA Oil Tools B.V. stands at the forefront of slickline technology, offering solutions that ensure safety, efficiency, and reliability. Our commitment to innovation and quality has established us as a trusted partner in the oil and gas industry worldwide.

Introducing ID Oiltools' Drill Collar Severing Tools - the reliable and safe solution for Pipe Recovery Operations. Our Drill Collar Severing Tools utilize Explosive Bridge-Wires to simultaneously detonate columns, creating a shock wave collision that severs the tubular with precision. Our tool provides a quick and effective solution to sever heavyweight drill pipe and drill collars, and is designed to conform to API RP-67 for maximum safety. With air shippable detonators and hardware shipped separately, our Drill Collar Severing Tools are the ultimate in convenience and efficiency. Our patented Explosive Bridge-Wire Detonators increase the precision of the colliding shock-waves for maximum performance, making it the tool of choice for stuck pipe or plug and abandonment (P & A) operations. Choose the tool with the largest possible diameter capable of running in the stuck pipe for maximum results. Tension should be applied to the tubing prior to detonation of the Severing Tool to assist in the removal of stuck tubulars. Trust ID Oiltools to provide the safe, efficient, and reliable solution for all your Pipe Recovery Operations.

MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer

Revolutionizing Industrial Cleaning with the 205-Litre EnviroBlu Barrel In the relentless pursuit of efficiency and sustainability, we at Mekapisk EnviroBlu Solutions Inc. have engineered a game-changing solution for industrial cleaning. Introducing the 205-litre barrel of EnviroBlu cleaner—an innovation designed to tackle the toughest cleaning challenges in the oil and gas industry, transportation, and beyond. Imagine a world where your rigs, trucks, and heavy equipment are impeccably clean, operating at peak performance, and you save time and money in the process. This is not just a vision; this is the reality with EnviroBlu. The Future of Industrial Cleaning At EnviroBlu, we are committed to providing the best environmentally safe cleaning and degreasing products available in the market today. Our 205-litre barrel of cleaner embodies this commitment with a water-based, non-toxic, phosphate-free formula that ensures fast and reliable cleaning results without harming the environment. This isn't just a cleaner; it's a leap forward in industrial maintenance technology. Unmatched Efficiency Time is money, and nowhere is this more true than in the industrial sector. Traditional cleaning methods are labor-intensive and time-consuming, often involving harsh chemicals that pose risks to both workers and the environment. EnviroBlu changes the game with its advanced aqueous surfactant technology. This formula penetrates dirt and grime at the molecular level, ensuring a thorough clean with minimal effort. The result? Faster cleaning times, less labor, and significant cost savings. Imagine reducing your cleaning downtime by half. Imagine your equipment not only looking pristine but also operating more efficiently because it's free from the grime that causes wear and tear. With EnviroBlu, this is not just possible; it's guaranteed. Cost-Effective Solutions Let's talk numbers. The 205-litre barrel of EnviroBlu is designed for large-scale cleaning operations, making it the ideal choice for rigs, trucks, and heavy machinery. By switching to EnviroBlu, you're not just choosing a superior cleaning product; you're making a smart financial decision. 1. Reduced Labor Costs: With EnviroBlu’s powerful cleaning action, the time required for each cleaning operation is drastically reduced. Less time spent cleaning means lower labor costs and more time focused on core operations. 2. Lower Product Usage: Our formula is highly effective, meaning you use less product to achieve the same—if not better—results. This translates to fewer purchases and lower overheads. 3. Extended Equipment Life: Clean equipment runs more efficiently and lasts longer. By removing the dirt and grime that cause wear and tear, EnviroBlu helps extend the lifespan of your machinery, reducing the need for costly repairs and replacements. Sustainability at Its Core We are living in a time where environmental responsibility is not just a choice but a necessity. EnviroBlu’s water-based, non-toxic, and phosphate-free formula is safe for both people and the planet. By choosing EnviroBlu, you are making a powerful statement about your commitment to sustainability. Our product is certified food safe by the Canada Food Inspection Agency (CFIA) and is a recognized Green Marine Partner, adhering to the highest environmental standards. Versatile Application The 205-litre barrel of EnviroBlu is not just for the oil and gas industry. Its versatility makes it suitable for a wide range of applications: • Rigs: Keep your drilling rigs in top condition with EnviroBlu’s powerful cleaning capabilities. Whether it’s the deck, the derrick, or the living quarters, EnviroBlu ensures a clean and safe environment. • Trucks: From transport trucks to service vehicles, EnviroBlu makes light work of heavy-duty cleaning. Ensure your fleet is always road-ready and looking its best. • Heavy Equipment: Cranes, bulldozers, excavators—no matter the equipment, EnviroBlu provides the cleaning power needed to keep them operating at peak efficiency. Join the Cleaning Revolution At Mekapisk EnviroBlu Solutions Inc., we believe in pushing the boundaries of what’s possible. Our 205-litre barrel of EnviroBlu cleaner is a testament to that belief. It’s more than just a product; it’s a revolution in industrial cleaning. Save time, save money, and save the planet—this is the EnviroBlu promise. Stay Green, Go Blu!

Elevate Your Security with ALCiT's SonicWall Partnership In the ever-evolving realm of cybersecurity, one name stands tall: SonicWall. This multi-award-winning titan has carved a niche as one of the premier cybersecurity companies, protecting networks and emails with unmatched prowess. ALCiT proudly partners with SonicWall, bringing you a gateway to fortified security that leaves no vulnerabilities unchecked. SonicWall: Guardian of Digital Realms Recognized as a cybersecurity powerhouse, SonicWall's reputation is written in awards and innovation. As threats grow in complexity, SonicWall evolves in protection. ALCiT joins forces with SonicWall, offering a shield against threats that's unmatched in the industry. Network Protection Redefined Versatile Security Portfolio: SonicWall's arsenal is ever-expanding, offering a diverse suite of security solutions. Whether you have a single office or a sprawling network, SonicWall's options cater to your needs. Your Partner in Selection: With ALCiT's guidance, you'll find the perfect SonicWall solution that suits your unique requirements. We're not just service providers; we're architects of your security fortress. Seamless Deployment, No Upfront Cost: Embrace the future with ALCiT's Firewall as a Service. Wave goodbye to outdated and insecure firewalls. Embrace the power of a Next Generation Firewall, without the burden of hefty upfront costs. Fortify Your Security Today, Not Tomorrow Why wait for threats to strike? With ALCiT's SonicWall partnership, your security's future starts now. Embrace the power of next-level protection and thrive in a landscape where your network and emails remain impervious to attacks. Secure Your Future Today ALCiT's partnership with SonicWall isn't just a collaboration; it's a commitment to your security's evolution.

Introducing the STM Step Mill from Marlin Oil Tools: Your Go-To Solution for Advanced Well Intervention and Milling Operations Marlin Oil Tools is excited to offer the STM Step Mill, a cutting-edge downhole tool specifically designed to enhance the efficiency of well intervention jobs. Whether you're dealing with bridge plugs, emergency lost equipment, or any obstruction softer than the mill's cutter, the STM Step Mill is engineered to grind and wash out these objects with unmatched efficiency. Key Features of the STM Step Mill: Superior Milling Performance: Designed to navigate and mill through downhole obstructions effectively, ensuring a clear wellbore for optimal production. Reduced Friction Surface: The STM Step Mill features a unique design with less friction surface, enabling it to mill out harder materials more efficiently than traditional tapered mills. Enhanced Weight-on-Bit Application: Its innovative design allows for higher weight on bit without the risk of stalling the downhole motor, maximizing milling effectiveness. Optimal Debris Removal: Equipped with multiple flushing holes, the STM ensures the efficient circulation of drilling fluid to remove milled particles from the well and cool the cutting edge. Durable Carbide Construction: Built with carbide welded onto the body, including options for crushed carbide and various insert designs, the STM Step Mill is designed for longevity and performance in challenging milling conditions. Comprehensive Redress Services: Marlin Oil Tools offers redress services for worn carbide, ensuring your STM Step Mill maintains peak performance throughout its service life. Elevate your well intervention strategies with the STM Step Mill from Marlin Oil Tools, a premier downhole tool designed for the oil and gas industry. Tailored for efficient grinding and removal of downhole obstructions, the STM Step Mill stands out with its reduced friction surface and ability to tackle harder materials without stalling the downhole motor. With its advanced carbide construction, optimal debris removal capabilities, and customizable insert options, the STM Step Mill is the ideal choice for increasing the ID of well restrictions and ensuring smooth wellbore conditions. Opt for Marlin Oil Tools’ STM Step Mill for enhanced well intervention and milling operations, backed by comprehensive redress services to extend tool life and performance. Why Choose the STM Step Mill from Marlin Oil Tools? Advanced Milling Efficiency: Offers unmatched efficiency in grinding down wellbore obstructions. Capability to Mill Harder Materials: Designed to tackle harder materials with greater ease compared to conventional mills. Higher Weight-on-Bit Flexibility: Enhances milling operations by allowing higher weight on bit without compromising tool performance. Customization and Longevity: Provides various carbide insert designs and redress services, ensuring a long service life tailored to your specific operational needs. The STM Step Mill by Marlin Oil Tools represents the forefront of downhole milling technology, offering a powerful solution for oil and gas operators focused on optimizing well intervention outcomes. Incorporate the STM Step Mill into your operations for smoother, more efficient wellbore preparation and obstacle management.