NIU - Pipe Inspection ROV

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

Unlock Energy Efficiency with Kessels API-611 Steam Turbine: The Ultimate PRV Replacement Solution In the dynamic world of industrial applications, energy efficiency is the cornerstone of sustainable operations. Kessels Steam Turbines is proud to offer a groundbreaking solution that replaces traditional Pressure Reducing Valves (PRV) with our robust, reliable, and highly efficient API-611 Steam Turbines. Revolutionizing Energy Efficiency Kessels Single Stage Steam Turbines are tailor-made to handle Saturated Steam at low inlet pressures, harnessing the pressure drop of steam to generate power through the turbine via geared or gearless Turbo Generator set solutions. Choice in Generators for Your Unique Needs Our Turbo Generator sets can be configured with either Induction Generators or Synchronous Generators, catering to the specific requirements of our customers. Energy Recovery at Its Best Kessels Industrial PRV replacement solutions are designed to recover wasted energy by reducing steam pressure through our steam turbines, surpassing the limitations of traditional PRVs. This not only generates valuable power for industrial use but also caters to the process steam requirement of the industry. The result? Drastically reduced operational costs and reduced reliance on the grid and other more expensive power sources. Balancing Act: PRV and Power Generation Kessels Single Stage Steam Turbines are ingeniously designed to enable customers to enjoy the full benefits of a PRV system while simultaneously generating useful power. This equilibrium is achieved without compromising the stability or safety of the system or their setup. Maximizing Power Output For optimum performance, Kessels offers the option of Multiple Valve Operated Steam Turbines. These turbines ensure customers get maximum power output, even at partial loads and varying steam flows. Our valves, available in the Single Stage Steam Turbine range, can be controlled automatically through the special PLC-based governing system provided by Kessels for turbines coupled to Induction Generators. Versatile Powerhouses Kessels API-611 Steam Turbines are versatile, highly efficient, rugged, and robust. They boast single disc one-row and two-row Curtis impulse-type wheels, making them suitable for a wide range of industrial applications. Additionally, these turbines can be retrofitted to any existing boiler setup, making them a versatile choice for various installations. Key Features: Versatile and highly efficient. Single disc one-row and two-row Curtis impulse-type wheels. Retrofittable to existing boilers. Operates efficiently with high exhaust steam pressures. PLC-based control panel with HMI screen for ease of use (optional). Compatible with both Induction and Synchronous Generators. Operates in solo mode or synchronized mode. Can be synchronized with the grid and/or other power sources. Reduces operational costs with a short payback period. Quick startup times and option for complete automatic operation. Choose Kessels for a Sustainable Future Elevate your industrial operations with the Kessels API-611 Steam Turbine, the ultimate PRV replacement solution that combines energy efficiency, reliability, and versatility. Contact us today to discover how our turbine can revolutionize your energy management and lead you toward unprecedented success.

Secure and Streamline Your Equipment Charging with the CSA 120 Unit Locking FAST Charger Rack from Provix Provix introduces the CSA 120 Unit Locking FAST Charger Rack (Part # NWI-NWCR-120BLC), a robust and efficient charging solution designed for large-scale mining, construction, and industrial operations. This high-capacity charger rack combines rapid charging technology with enhanced security, making it an essential component for any operation looking to optimize equipment readiness and safety. High-Capacity Charging for Large Operations The CSA 120 Unit Charger Rack is tailor-made for operations that require fast and efficient charging of a large number of devices. With the capacity to charge 120 units simultaneously, it offers charging times of just 4 hours for the WISE LITE2 and 5 hours for LAMP3A/4A models. This impressive speed ensures that your equipment is always ready for use, minimizing downtime and maximizing productivity. Enhanced Security with Locking Feature One of the standout features of the CSA 120 Unit Charger Rack is its locking mechanism. This added layer of security is crucial for operations where equipment safety and prevention of unauthorized access are paramount. The locking feature ensures that your valuable equipment is protected during charging, providing peace of mind and enhanced safety in the workplace. Space-Efficient Design for Busy Workplaces Despite its large capacity, this charger rack is designed with space efficiency in mind. Its single-sided configuration allows for easy placement in equipment rooms, charging stations, or in areas where space is at a premium, ensuring a streamlined and organized charging setup. Built for Durability and Reliability Constructed to withstand the demanding environments typical of mining and industrial settings, the CSA charger rack is both durable and reliable. Its robust build ensures it can endure daily use, offering long-term, dependable performance. Ideal for Comprehensive Charging Management The CSA 120 Unit Locking FAST Charger Rack is an ideal solution for mining companies, construction firms, and rental equipment providers managing large fleets of devices. Its ability to securely charge a significant number of units quickly makes it a valuable tool for large teams and operations. Upgrade Your Charging Infrastructure Today Invest in the Wisdom CSA 120 Unit Locking FAST Charger Rack from Provix to enhance the efficiency and security of your charging processes. Visit www.provix.net to learn more about this advanced charging solution and discover our wide range of high-quality mining equipment.

ELEKS: Empowering Energy Sector Transformation with Blockchain Solutions In the dynamic landscape of the energy sector, innovation isn't just a trend – it's a necessity. ELEKS, as a trailblazer in software engineering, brings to the table a game-changing proposition that holds the potential to reshape the energy industry: blockchain-powered business solutions. Through our deep-rooted energy sector technology expertise, we're introducing a new era of possibilities that redefines data management, transparency, security, and efficiency. Here's a glimpse into how ELEKS can be your partner in harnessing the full potential of blockchain technology for unparalleled growth: Empower Data Management: Blockchain technology is a game-changer in data management. ELEKS' solutions enable energy companies to handle data with unprecedented efficiency, accuracy, and security. Asset Ownership Tracking: Say goodbye to ambiguity. Our blockchain-powered solutions provide a foolproof system for tracking asset ownership, ensuring transparency and accountability. Swift and Secure Transactions: Energy trading just got a whole lot smarter. ELEKS leverages blockchain to facilitate quick and secure settlement and recording of transactions, eliminating intermediaries and streamlining processes. Elevated Business Transparency: Transparency is no longer a challenge. Our blockchain solutions bring transparency to the forefront, ensuring all stakeholders have access to real-time, tamper-proof data. Auditability Redefined: Auditing becomes a breeze. ELEKS' blockchain solutions offer auditability beyond comparison, giving regulatory bodies instant access to secure and tamper-proof energy data. Unprecedented Security: Security isn't an option; it's a mandate. Our solutions empower energy companies to maintain robust security protocols, ensuring data integrity and mitigating risks. Regain Control: Ownership with control. Our blockchain-powered solutions allow data source owners to maintain complete control over security and accessibility, reinforcing trust and control. Efficiency Unleashed: Efficiency is the heart of our solutions. By eliminating intermediaries and enhancing data accuracy, we drive efficiency to new heights. Data-Driven Decision Making: Make informed decisions, backed by reliable data. ELEKS' solutions equip energy companies with accurate and real-time insights, facilitating data-driven strategies. ELEKS: Your Path to Energy Innovation ELEKS isn't just a service provider; we're your innovation enabler. With our energy sector technology expertise, we're not just implementing blockchain solutions – we're rewriting the energy sector narrative. Our goal is to empower energy companies with the tools they need to thrive in a data-centric world. Embrace a future where blockchain technology shapes your energy operations, revolutionizing data management, transparency, and efficiency. With ELEKS by your side, the possibilities are limitless, and your journey towards energy innovation is destined for success.

Streamline Wellbore Cleanout with HOCA Oil Tools' Sand Pump Bailers In the fast-paced and ever-evolving oilfield industry, efficiency and reliability are paramount. HOCA Oil Tools, a leader in innovative downhole solutions, introduces the Sand Pump Bailer – a cutting-edge tool designed for the effective cleanout of sand, debris, and other obstructions from wellbores. This essential tool is part of our comprehensive range of downhole slick line tools, engineered to enhance the safety and efficiency of your operations. Innovative Solutions for Complex Challenges: The Sand Pump Bailer The HOCA Sand Pump Bailer is specifically designed to address the challenges associated with sand and debris accumulation in the wellbore. Utilizing a simple yet effective mechanism, it allows for the removal of obstructive materials, ensuring a clear path for production and extending the life of the well. Constructed with high-quality materials, the Sand Pump Bailer withstands the harsh downhole environment, delivering consistent performance and durability. Elevate Your Downhole Operations with HOCA Oil Tools At HOCA Oil Tools, we are committed to delivering solutions that meet the unique needs of the oil and gas industry. Our Sand Pump Bailers embody this commitment, providing an efficient, safe, and cost-effective solution for wellbore cleanout challenges. With a focus on innovation, quality, and customer service, we ensure that our tools not only meet but exceed the expectations of our clients. Incorporate HOCA's Sand Pump Bailers into your downhole operations and experience a new standard of efficiency and reliability. Choose HOCA Oil Tools for your downhole needs and unlock the full potential of your wellbore operations. Leverage the power of advanced downhole solutions with HOCA Oil Tools. Our Sand Pump Bailers are more than just tools – they are partners in your operational success, ensuring that your wells remain productive, safe, and free from obstructions.

Expert Safe-T-Whip Qualified Installers: Your Gateway to Safety and Efficiency At Safe-T-Whip & Restraints Inc., we not only offer top-of-the-line safety restraint systems but also a comprehensive service that ensures your worksite meets all safety standards. Renting or owning your own Safe-T-Whip system is a step towards enhanced safety, but qualified installation personnel are essential to ensure compliance with local safety codes. That's where our expert qualified installers come in to make a real difference. Your Safety, Our Priority: We understand the criticality of safety in the oilfield, and that's why we provide the option of sending our qualified installers to your site to perform the rig up and down. Their expertise and experience ensure that every aspect of the installation process meets the highest safety standards, giving you peace of mind that your workforce is protected. Empowering Your Crew: Alternatively, we can certify one of your own crew members to become proficient installers through our Safe-T-Whip certification process. We provide comprehensive training that equips them with the knowledge and skills needed to perform installations efficiently and effectively. Once trained, they'll be able to rig up and down the system confidently, ensuring maximum safety for your operations. Quick and Easy Installation: The Safe-T-Whip system is designed with simplicity and efficiency in mind. Whether our qualified installers handle the setup or your certified crew members take charge, you'll quickly discover just how quick and easy the installation process can be. Understanding the flow of the links and checking for complete link coverage becomes second nature with our training. Ensuring Your Safety: Your worksite's safety is at the core of our service. No matter which installation option you choose, we are here to help you every step of the way. Rest assured that with our qualified installers or your certified crew, your Safe-T-Whip system will be installed correctly, ensuring maximum protection for your team and equipment. Lightweight and User-Friendly: The entire Safe-T-Whip system is designed to be lightweight and user-friendly. Hauling and installing it require just a single person, enhancing convenience and making it a practical safety solution for your oilfield operations. Choose Safe-T-Whip & Restraints Inc. for Enhanced Safety: With Safe-T-Whip qualified installers, you gain access to a team of experts who prioritize your safety above all else. Contact us today and discover how we can make your worksite safer and more efficient. At Safe-T-Whip & Restraints Inc., your safety is our commitment.

KEY360 Inc offers a single integrated Business Management Platform comprising Business Intelligence, Project Management, Big Data & Analytics, ERP, Behaviour and Strategy Modification. - Over 140 Business and Project Management Systems on one platform available - Unique and extremely effective workflow engine - Remarkable “BIG DATA” and bulk transaction capability - Integrated Real Time reporting and dashboarding - Multi-company platform allows all project users to integrate seamlessly KEY Differentiators: - KEY360 Provides an exceptional opportunity for your organisation to attract new clients and build long terms relationships. - KEY360 is a Microsoft Gold Partner and Approved Microsoft Co-Sell Partner and can be purchased directly from the below online marketplaces: - Microsoft AppSource: KEY360 Capital Management Projects - Azure Marketplace: KEY360 Capital Management Projects - KEY360 is reputedly the most comprehensive and versatile Capital Project Management, Business Digitalization & Business Optimization solution available.

Revolutionize Your Well Performance with HOCA Oil Tools' Running Tools for Gas Lift In the technologically driven world of oil and gas extraction, efficiency and innovation are paramount to success. HOCA Oil Tools, a leading provider of downhole slick line tools, is at the forefront of this evolution with its state-of-the-art Running Tools for Gas Lift operations. These tools are specifically designed to enhance the installation and performance of gas lift systems, which are crucial for optimizing production in oil and gas wells. HOCA's Running Tools for Gas Lift: Elevating Production Standards HOCA Oil Tools' Running Tools for Gas Lift are engineered for precision and durability, providing the perfect solution for the deployment of gas lift valves and mandrels. These tools are essential for maintaining continuous and efficient gas lift operations, ensuring that production is maximized and well integrity is preserved. Constructed with high-grade materials and designed to meet the rigorous demands of the downhole environment, our Running Tools for Gas Lift are your key to unlocking enhanced well performance. Experience the HOCA Difference in Gas Lift Operations At HOCA Oil Tools, we understand the challenges faced by the oil and gas industry and are committed to providing solutions that drive success. Our Running Tools for Gas Lift are a testament to this commitment, offering unparalleled performance, reliability, and safety. Incorporating our Running Tools into your gas lift operations signifies a step toward enhanced productivity and operational excellence. With HOCA Oil Tools, you gain more than just a supplier; you gain a partner dedicated to your success, offering innovative solutions and expert support tailored to your unique challenges. Choose HOCA Oil Tools' Running Tools for your Gas Lift needs and transform the efficiency and safety of your downhole operations. Partner with us, and take the first step towards maximizing your well's productivity and profitability. With HOCA Oil Tools, elevate your gas lift operations to new heights, where cutting-edge technology meets unparalleled performance and reliability.

Precision Chemical Stimulation with InWaTec Combined’s Mini-Coil Services In the realm of enhancing well productivity, chemical stimulation stands as a cornerstone technique, vital for improving hydrocarbon flow from reservoir to surface. InWaTec Combined proudly offers Mini-Coil Services, a highly specialized approach to chemical stimulation that addresses the need for precise fluid placement and robust performance under high pressures. Our Mini-Coil Tubing is the ideal conduit for delivering stimulation fluids in exact quantities directly to the target zones within the well. This precise delivery is critical for the effectiveness of chemical treatments, ensuring that every drop of stimulating fluid is utilized to its maximum potential. Advantages of Mini-Coil Tubing in Chemical Stimulation: High-Pressure Capability: The smaller diameter of our Mini-Coil Tubing allows for operations at significantly higher pumping pressures compared to traditional coiled tubing. This is particularly advantageous during chemical stimulation, where certain treatments require the application of fluids under substantial pressure to achieve optimal penetration and reaction within the reservoir. Precision in Fluid Placement: The precise placement of stimulation chemicals is crucial for the success of any treatment. Our Mini-Coil Tubing services ensure that the stimulation fluids are deposited exactly where needed, which is particularly beneficial in complex reservoirs or when targeting specific formation layers. Efficient Well Lifting: Post-stimulation, wells often require assistance to commence or resume production. The Mini-Coil Tubing is not only perfect for fluid delivery but also for well lifting operations, facilitating the transition from treatment to production smoothly and effectively. Tailored Operations: Understanding that flow rates and snubbing force are aspects where Mini-Coil Tubing has limitations, InWaTec Combined has optimized the design and operation of our Mini-Coil Services to maximize their strengths. Our team of experts can adjust operations to suit the specific conditions and requirements of each well, ensuring that the limitations are mitigated and the advantages are fully leveraged. InWaTec Combined’s Mini-Coil Services represent a fusion of innovation, precision, and efficiency. We bring this triad to every chemical stimulation project, ensuring that our clients' wells receive the most meticulous and effective treatment possible. By choosing InWaTec Combined for your chemical stimulation needs, you are opting for a partner dedicated to enhancing your well performance with cutting-edge solutions. Our Mini-Coil Services are a testament to our commitment to pushing the boundaries of what is possible in well intervention and stimulation. Experience the difference with InWaTec Combined’s Mini-Coil Services—where small-scale delivery meets large-scale impact, driving your wells towards maximum productivity.

The tubing hanger holds a feed-through mandrel equipped with the proper seals. Feed-through mandrel seals contain well pressure and prevent gas leaks at the surface. Power cables are connected to the two ends of this device via their three-phase connectors (also called: lower and upper pigtails). The feedthru portion of the system provides a fluid block at the wellhead permitting electrical power to pass safely and reliably through the well’s pressure barrier. The connector works with the wellhead manufacturer to assure proper fit and material compatibility.

Introducing the Rod Sentinel. Sivam has designed and patented the first fail safe, surface controlled subsurface safety valve for sucker rod application called rod sentinel - an innovative technology that changes the game in dual barrier policy of the oil and gas market. This Sivam safety valve can be applied in all sucker rod completed wells where it is necessary to comply with the dual barrier policy. The Rod Sentinel SCSSSV can be installed in landing nipple for 2.81 inches surface controlled wireline retrievable insert valves with standard profiles. The Rod Sentinel SCSSSV lock mandrel has been designed to be installed and retrieved by the sucker rod string in combination with the pump plunger so it completely avoids the cost and risk of a workover. The beam pump safety valve was designed in compliance with the fail-safe concept. Control line pressure keeps the valve open and when the pressure fails the preloaded power spring in the valve pushes the sealing pads within the cone housing and the valve closes using the same hydraulic control line technology as a conventional SCSSSV.

OH-BGE Bilge Absorbent Boom is engineered to address the specific challenges of oil accumulation in the bilge, arising from engine leaks and oil changes. With its unique design and technical specifications, this product is your ally in safeguarding the environment. Technical Specifications: Part Number: OH-BGE Product Type: Absorbent Bilge Fluids Absorbed: Oil-Based Liquids Volume Absorbed per Unit: 1.59 gallons Color/Pattern: White Outside Skin Material: Polyester Rope Along Length: No Neutralizing: No Floating: Yes UV Resistant: No Size: 10” x 44” Filler Material: Polypropylene Filler Flame Resistant: No Incinerable: Yes Applications: • Marine vessels • Boats • Oil-powered machinery In the maritime tapestry where vessels traverse vast waters, a silent guardian emerges—the OH-BGE Bilge Absorbent Boom. Beyond its utilitarian role, this product narrates a story of efficiency, environmental consciousness, and unwavering commitment to technical excellence. Can is known for its testament to precision in oil cleanup. Meticulously crafted, it targets oil floating in the bilge, whether a result of engine leaks or the aftermath of oil changes. A Polypropylene Filler ensures optimal absorption, leaving the bilge spotless and safeguarding marine environments from potential contamination. Very handy to learn that the OH-BGE, equipped with an integrated loop of rope, effortlessly finds its place in the bilge. This seamless application isn't merely convenient; it's a strategic move to efficiently absorb oil before water circulates back to the ocean, lake, or river. Choosing the OH-BGE isn't merely a cleanup decision; it's a commitment to safeguarding our waters. This absorbent boom becomes a catalyst for environmental protection, actively contributing to the preservation of aquatic ecosystems. With every use, it signifies a pledge to a cleaner and more sustainable maritime future. the OH-BGE becomes an investment in environmental stewardship. It transcends being a product and emerges as a strategic choice for compliance with rigorous environmental regulations. This proactive step shields against potential fines tied to oil pollution, aligning fiscal prudence with ecological responsibility. OH-BGE orchestrates a symphony of technical prowess. Tailor-made with a specific size of 10” x 44” and an impressive volume absorption of 1.59 gallons per unit, it becomes an exemplar of efficient and targeted oil cleanup in the bilge. This isn't just a boom; it's a harmonious blend of technical excellence and environmental responsibility. Choose OH-BGE – where every ripple narrates a tale of environmental stewardship.

Introducing Xantham Gum from Cleanstream – the versatile solution for your drilling and completion needs. As a leader in providing innovative and environmentally responsible solutions for the oil and gas industry, Cleanstream is proud to offer this unique polymer for rheology modification, hole cleaning, and solids suspension. What sets Xantham Gum apart is its ability to provide excellent friction reduction – a feature that is unmatched by most other polymers in oilfield drilling and completion applications. Additionally, it can be used in most types of water-based fluids, making it an incredibly versatile product for your operations. Our in-house laboratory facilities allow us to determine the right approach to solve your specific problem. And at Cleanstream, we are committed to developing eco-friendly solutions for as many applications as possible. Whether you need Xantham Gum for a specific project or require our personnel and equipment for complete execution, we have you covered. Click on the datasheet for more information or contact us to learn how Xantham Gum can benefit your operations. Trust Cleanstream for innovative and sustainable solutions for your oil and gas needs.

Get Paid Faster with Dunbridge Financial: Empowering Your Business with Speed and Efficiency As a business owner, receiving foreign payments can sometimes be a challenging and time-consuming process. At Dunbridge Financial, we understand the importance of getting paid faster by foreign companies, and our financial service is designed to empower your business with speed and efficiency. Seamless Foreign Payment Solutions Dunbridge Financial offers a seamless platform that enables your business to receive foreign payments faster and with ease. Say goodbye to delays and hassles, and embrace a new era of streamlined international transactions. Why Choose Dunbridge Financial for Receiving Foreign Payments? 1. Speed and Efficiency Time is money, and we value both. With Dunbridge Financial, you can accelerate your payment collection process, ensuring you get paid faster by foreign companies. Our technology-driven platform and strong global banking relationships allow for quick and secure transactions, putting your funds where they need to be promptly. 2. Expert Support Navigating the complexities of international payments can be daunting, but not with Dunbridge Financial. Our team of experts is here to provide you with dedicated support and guidance, helping you navigate the world of foreign payments with confidence. 3. Transparent and Cost-Effective Transparency is at the core of our services. With Dunbridge Financial, you'll enjoy clear and competitive pricing, without any hidden fees. What you see is what you get - straightforward and cost-effective foreign payment solutions. 4. Secure and Compliant Your financial security is our top priority. Through our trusted payment service partners compliant with industry standards like ISO27001, we ensure that your funds and data are protected with the highest level of security. Join Us Today and Accelerate Your Payment Collections Don't let slow payment processing hold back your business growth. Join Dunbridge Financial today and experience the power of receiving foreign payments faster than ever before. Empower your business with speed, efficiency, and reliability. Seize the Advantage with Dunbridge Financial By choosing Dunbridge Financial, you gain a strategic advantage in the global market. Get paid faster by foreign companies, streamline your financial operations, and take your business to new heights. Experience the Difference Unlock a world of financial freedom and efficiency with Dunbridge Financial. Sign up now and embrace a seamless foreign payment experience. Get paid faster and propel your business towards greater success. The future of international transactions starts here.

Introducing the ImposionStixx by StimStixx Technologies - Redefining Wellbore Perforation Cleaning with Precision Implosion! Are you ready for a game-changing solution to enhance your wellbore perforation cleaning? Look no further than the ImposionStixx by StimStixx Technologies. Our revolutionary product utilizes a specially formulated solid acid stick, capable of delivering heated acid vapor with pinpoint accuracy at the zone of interest, while creating an extraordinary implosion downhole. Harnessing the power of highly reactive heated acid vapor, the ImposionStixx guarantees increased penetration and optimal contact with contaminants and carbonate scale, effectively cleaning wellbore perforation tunnels like never before. The implosion created downhole ensures a thorough and efficient cleaning process, leaving no room for compromise when it comes to well stimulation. The ImposionStixx offers unparalleled environmental benefits as well. As the heated acid vapor interacts with contaminants and carbonate scale, it vaporizes and becomes fully spent down-hole, leaving no contaminated effluent behind. This not only reduces the risk of spills at the surface but also eliminates the need for post-treatment clean-up or disposal. With StimStixx Technologies, you can rest assured that you are making a choice that prioritizes both operational excellence and environmental responsibility. Say goodbye to traditional methods that fall short in achieving the level of precision and effectiveness you deserve. The ImposionStixx is here to revolutionize wellbore perforation cleaning, providing you with exceptional results, increased operational efficiency, and peace of mind. Join the ranks of industry leaders who trust StimStixx Technologies to deliver cutting-edge solutions for well stimulation. Experience the power of precision implosion with the ImposionStixx and unlock the true potential of your wellbore perforation cleaning. The future of well stimulation starts here.

Storm Choke® H safety valves are ambient-type, wireline retrievable valves that are normally closed and precharged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge, as a result of a rupture in the flowline or surface equipment, the dome pressure and valve spring are designed to close the valve, shutting in the well. The H valve is used in wells producing large volumes of abrasive fluids. Its large bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal (MTM) ball and seat is used as the primary closure mechanism. The H valve is ideal for protecting wells with declining bottomhole pressure because this valve is tubing pressure sensitive instead of velocity sensitive. To reopen, the valve pressure must be fully equalized either by applying pressure in the tubing from the surface or by running a prong to allow equalization from below. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells producing large volumes of abrasive fluids » Wells with declining bottomhole pressure » Wells with no provisions for surface-controlled valves Features » Large bore not restricted by a flow bean » MTM ball and seat » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Tailor-Made Gas Solutions: Your Trusted Partner for Mobile Gas At Lovat Gas Solutions, we understand that every gas-related application is unique. That's why we leverage our extensive experience and expertise to develop tailor-made solutions that perfectly match your specific needs. Whether it's volume, application, duration, or location, we consider all the relevant factors to deliver the best solution for your job. What sets Lovat Gas Solutions apart? 1. Experience and Expertise: With years of industry experience, our team has a deep understanding of gas-related challenges and requirements. We have successfully designed and executed numerous projects across various sectors, earning the trust and loyalty of our customers. 2. Customized Approach: We believe in the power of customization. By considering your specific requirements, we develop fit-for-purpose solutions that precisely address your needs. Our solutions are not one-size-fits-all; they are carefully tailored to ensure optimal performance and efficiency for your application. 3. Quality Solutions: Our commitment to quality is unwavering. We take pride in delivering solutions that meet the highest standards of performance, safety, and reliability. When you choose Lovat Gas Solutions, you can trust that our fit-for-purpose solutions will exceed your expectations and deliver exceptional results. 4. Customer Satisfaction: Your satisfaction is our ultimate goal. We prioritize open communication and collaboration to ensure that we fully understand your objectives and challenges. Our dedicated team goes the extra mile to provide personalized service and support, making us the first call for our customers whenever they need mobile gas solutions. Contact Lovat Gas Solutions today and discover how we can help you with your mobile gas needs. We are confident that our tailor-made solutions will exceed your expectations, and one job is all it takes for you to experience the excellence of Lovat Gas Solutions. Let us be your trusted partner in delivering exceptional gas solutions that drive the success of your operations. Together, we will find the perfect fit for your gas requirements with Lovat Gas Solutions.

The Oil-Only Absorbent Pillow, represented by the OH-PI1212, emerges as a utilitarian solution. From the versatile material known as polypropylene, this unassuming pillow bears the capacity to redefine the efficiency and sustainability of liquid cleanup. Why is Polypropylene chosen as the material for use? Polypropylene is a preferred material for oil-based cleanup for several reasons, making it an ideal choice for products like the Oil-Only Absorbent Pillow. Hydrophobic Nature Polypropylene is inherently hydrophobic, meaning it repels water. This characteristic is crucial in oil-based cleanup scenarios where the goal is to selectively absorb oils while avoiding the absorption of water. The hydrophobic nature of polypropylene ensures that the material remains focused on its primary task—absorbing oil-based liquids. High Affinity for Oil Polypropylene has a high affinity for oil-based substances. When in contact with oils, polypropylene quickly absorbs and retains these liquids. This property enhances the efficiency of cleanup operations, allowing for the rapid containment and absorption of oil spills. Lightweight and Durable Polypropylene is a lightweight yet durable material. This is advantageous in cleanup products like absorbent pillows, as it ensures ease of handling and deployment while maintaining structural integrity during use. The lightweight nature makes these products practical and user-friendly in various industrial settings. Chemical Resistance Polypropylene is known for its chemical resistance, providing stability when exposed to a wide range of substances, including oils and hydrocarbons. This resistance ensures that the material remains effective and does not break down when encountering various oil-based liquids. Recyclability Polypropylene is recyclable, adding an environmentally conscious aspect to its use in oil-based cleanup products. The ability to recycle polypropylene helps reduce the overall environmental impact by promoting the responsible disposal and reuse of materials. Cost-Effectiveness Polypropylene is a cost-effective material, contributing to the affordability of products designed for oil-based cleanup. Inert Nature Polypropylene is inert, meaning it does not react with or alter the composition of the substances it meets. This inert nature is crucial in cleanup situations where the goal is containment and absorption without introducing additional complications or reactions. Where is the Oil-Only Absorbent Pillow typically used? • Industrial facilities • Marine environment • Construction sites • Oil refineries • Emergency response • Environmental cleanup projects • Agricultural operations • Transportation Technical Specifications Part Number: OH-PI1212 Product Type: Absorbent Pillow Fluids Absorbed: Oil Based Liquids Volume Absorbed per unit: 1.35 gal Colour/Pattern: White Outside Skin Material: Polyester Rope Along Length: No Volume Absorbed per pkg.: 6.7 gal Floating: Yes UV Resistant: No Size: 12” x 12” Filler Material: Polypropylene Filler Sock/Boom Profile: Square Flame Resistant: No Incinerable: Yes

Unleash Precision and Control with Poseidon Robotics' Advanced Manipulator Arms In the fascinating world of subsea exploration and robotics, precision and control are paramount. Poseidon Robotics, the leading innovator in subsea robotics, is proud to introduce our cutting-edge Manipulator Arms – a revolutionary solution designed to elevate your underwater operations to new heights of efficiency and performance. The Reach Alpha – A Marvel of Engineering At Poseidon Robotics, we believe in bringing you the best of the best. That's why we have collaborated with BLUEPRINTLABS in Australia to present the Reach Alpha, a state-of-the-art manipulator arm that embodies excellence in design, engineering, and performance. Crafted with precision and tested rigorously, the Reach Alpha is the epitome of reliability, making it an indispensable tool for your subsea missions. Integration for Maximum Convenience At Poseidon Robotics, we understand that time is of the essence in your underwater endeavors. That's why we offer the option to integrate the Reach Alpha manipulator arm onto your system before shipping. Our expert technicians ensure seamless integration, saving you valuable time and effort during setup and installation. With the Lanai Pro seamlessly integrated into your system, you can hit the water running and focus on what truly matters – accomplishing your mission with precision and efficiency. Precision at Your Fingertips The Reach Alpha 5-Function control system, developed by BLUEPRINTLABS, empowers you with unparalleled control over the Reach Alpha manipulator arm. With five precision functions at your fingertips, you can manipulate objects with dexterity and ease, replicating the human hand's natural movements even in the depths of the ocean. This level of control opens up new possibilities for scientific research, subsea inspections, construction projects, and even search and rescue operations. Designed for Durability and Performance Poseidon Robotics takes pride in delivering products that endure the harsh subsea environment. The Reach Alpha manipulator arm is engineered with high-quality materials and undergoes extensive testing to ensure it withstands the rigors of underwater operations. Its robust construction, combined with BLUEPRINTLABS' cutting-edge control technology, offers you a manipulator arm that performs flawlessly, mission after mission. Enhance Your Subsea Operations With Poseidon Robotics' advanced manipulator arms, you can accomplish tasks with unparalleled precision and efficiency. Whether you are performing intricate scientific research or handling heavy equipment during construction projects, the Reach Alpha is the perfect companion to elevate your subsea operations to new heights. Choose Poseidon Robotics When it comes to subsea robotics, Poseidon Robotics stands above the rest. With a commitment to innovation, quality, and customer satisfaction, we have earned the trust of professionals in the industry worldwide. Our partnership with BLUEPRINTLABS brings you the finest manipulator arm technology available today. Embrace Precision and Performance Join the ranks of successful subsea explorers who trust Poseidon Robotics' Manipulator Arms for their critical underwater operations. Embrace precision, embrace performance, and achieve new levels of success with Poseidon Robotics by your side. Elevate Your Subsea Operations Today Take the first step towards unparalleled precision and control. Contact Poseidon Robotics today to learn more about our advanced Manipulator Arms and how they can transform your subsea missions. Let us be your partner in success as you explore the depths and conquer new frontiers beneath the waves.

Unlocking Downhole Potential with HOCA Oil Tools' Miscellaneous Running Tools In the dynamic and complex world of oil and gas operations, versatility and precision are key to overcoming the myriad challenges encountered downhole. At HOCA Oil Tools, we understand that every operation is unique, requiring specific tools for optimal performance. This is why we proudly offer our range of Miscellaneous Running Tools, designed to meet the diverse needs of downhole operations with unparalleled efficiency and reliability. HOCA's Miscellaneous Running Tools: A Symphony of Versatility and Efficiency Our Miscellaneous Running Tools encompass a wide array of equipment, each crafted to address specific downhole tasks and challenges. From setting and retrieving plugs, packers, and gauges to handling unique downhole interventions, these tools are the unsung heroes of the oilfield, ensuring smooth and successful operations. Manufactured with precision and built to withstand the harsh downhole environment, our tools embody our commitment to quality, innovation, and functionality. Experience the HOCA Oil Tools Advantage At HOCA Oil Tools, we are dedicated to empowering the oil and gas industry with superior downhole solutions. Our range of Miscellaneous Running Tools is a reflection of this commitment, designed to address the multifaceted challenges of modern downhole operations. Whether you're tackling routine maintenance or facing complex well intervention scenarios, our tools provide the versatility, efficiency, and reliability you need to succeed. Incorporating our Miscellaneous Running Tools into your operations means partnering with a company that understands the intricacies of downhole challenges and is committed to providing solutions that drive success. With HOCA Oil Tools, you're not just choosing tools; you're choosing a partner dedicated to supporting your operational goals with innovative and dependable solutions. Choose HOCA Oil Tools for your downhole needs and join the ranks of satisfied customers who rely on our Miscellaneous Running Tools to unlock the full potential of their operations. Elevate your downhole success with HOCA Oil Tools – where innovation, efficiency, and reliability converge.