Wisdom Lamp KL5MS

Let Sunkers Marine arrange all your marine needs with our network of service providers.

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.

Unlocking the Power of Hydrogen with Lovat Gas Solutions Methane, the cleanest burning hydrocarbon, holds immense potential for fueling the future. By removing the carbon component, we are left with hydrogen, a clean and renewable source of power. Lovat Gas Solutions understands the transformative power of hydrogen and is here to assist you in realizing the full potential of this remarkable energy source. As a forward-thinking company, we recognize that hydrogen is the fuel of the future. When hydrogen is reacted in a fuel cell, it generates clean power, emitting only water vapor as a byproduct. This makes hydrogen a game-changer in the quest for sustainable and environmentally-friendly energy solutions. Our team of experts at Lovat Gas Solutions is well-versed in the hydrogen sector, equipped with over 80 years of combined experience in compressed gases. We have the knowledge, skills, and dedication to assist you in your hydrogen projects, no matter the scale or complexity. Whether you require hydrogen tube trailers to support fuel cell vehicle demonstrations or other hydrogen-related initiatives, our team is ready to provide the solutions you need. We understand the unique requirements of the hydrogen industry and can guide you through the process, ensuring seamless and efficient hydrogen supply for your projects. Why choose Lovat Gas Solutions for your mobile hydrogen supply needs? 1. Expertise in Compressed Gases: With our extensive experience in compressed gases, we possess a deep understanding of the technicalities and intricacies involved in hydrogen supply. Our team has specific expertise in the hydrogen sector, allowing us to provide tailored solutions for your unique requirements. 2. Commitment to Clean Energy: We share your passion for clean and sustainable energy solutions. By harnessing the power of hydrogen, we aim to contribute to a greener future. Let us assist you in leveraging the immense potential of hydrogen for your projects. 3. Reliable Support: Our team of experts is dedicated to providing reliable support throughout your hydrogen project. We are committed to understanding your specific needs and delivering comprehensive solutions that meet your objectives, ensuring a seamless and successful experience. 4. Collaborative Approach: At Lovat Gas Solutions, we value collaboration and partnership. We believe in working closely with our clients, understanding their goals and challenges, and developing tailored solutions that drive their success. Your satisfaction is our top priority. Embrace the future of clean energy with Lovat Gas Solutions. Contact our experts today to discuss your mobile hydrogen supply needs and how we can assist you in realizing the full potential of this transformative fuel. Together, let's power a sustainable future with hydrogen.

Introducing Canaweld's Electrode Holder EH 401 - Power, Precision, and Durability in Your Hands! When it comes to welding, having the right tools in your hands can make all the difference. That's why Canaweld is proud to present the EH 401 Electrode Holder - a Canadian-designed, heavy-duty, and versatile tool that will elevate your welding experience to new heights. Designed to Perfection - Light Yet Heavy Duty: At Canaweld, we understand the importance of balance in welding equipment. The EH 401 Electrode Holder combines the best of both worlds - it is exceptionally light in weight for easy handling, yet built with the sturdiness and durability of premium copper and brass alloys. Weld with confidence, knowing that our Electrode Holder is engineered to withstand the toughest welding conditions. Meeting International Standards - Quality You Can Trust: Your safety is our top priority. That's why the EH 401 Electrode Holder has undergone rigorous testing according to international standards, including IEC 60974-11. It has passed all electrical, impact, insulation, and heating tests with flying colors, ensuring that you get a reliable and safe tool every time. Unleash the Power - 400 Amps at 35% Duty Cycle: When you need the power to handle heavy welding tasks, the EH 401 delivers. With a robust 400 Amps at 35% Duty Cycle in 104°F/40°C, this Electrode Holder is ready to tackle any challenge you throw its way. Whether you're working on pipelines, structural welding, or any oil and gas project, the EH 401 is your reliable companion. Built for Convenience - Easy Cable Connection and More: Welding should be seamless, and that's why we've designed the EH 401 with ease of use in mind. Its special design allows for quick and simple cable connection, making setup a breeze with the included free spanner. A copper bush ensures a secure and damage-free connection to the welding cable, enhancing electricity conductivity and extending the life of the connection. Flexible and Adaptable - Your Welding Ally: The EH 401 Electrode Holder offers a 6-position jaw pattern, allowing you to use it in 45, 90, or 180-degree positions. Versatility is key, and this holder provides the flexibility you need to achieve precise welding results, no matter the angle or position. Get Your Canaweld EH 401 Electrode Holder Today: With Canaweld's EH 401 Electrode Holder in your hands, welding becomes an art. Unlock the power, precision, and durability that our Canadian-designed holder brings to the table. Whether you're a seasoned professional or just starting on your welding journey, the EH 401 will be your trusted welding ally. Experience the Canaweld difference - Choose the EH 401 Electrode Holder and take your welding to the next level!

Storm Choke® H safety valves are ambient-type, wireline retrievable valves that are normally closed and precharged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge, as a result of a rupture in the flowline or surface equipment, the dome pressure and valve spring are designed to close the valve, shutting in the well. The H valve is used in wells producing large volumes of abrasive fluids. Its large bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal (MTM) ball and seat is used as the primary closure mechanism. The H valve is ideal for protecting wells with declining bottomhole pressure because this valve is tubing pressure sensitive instead of velocity sensitive. To reopen, the valve pressure must be fully equalized either by applying pressure in the tubing from the surface or by running a prong to allow equalization from below. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells producing large volumes of abrasive fluids » Wells with declining bottomhole pressure » Wells with no provisions for surface-controlled valves Features » Large bore not restricted by a flow bean » MTM ball and seat » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Enhance Your Fabrication Capabilities with Pipe Bender Leasing from CWB National Leasing Streamlining Your Operations with Cost-Effective and Flexible Equipment Solutions For businesses in the plumbing, HVAC, automotive, or construction industries, precision in pipe bending is crucial for efficient operations and quality workmanship. Leasing pipe benders through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and practical solution for businesses seeking to enhance their pipe fabrication capabilities. Here’s how leasing pipe benders can benefit your business: 1. Rapid Access to Advanced Fabrication Equipment CWB National Leasing understands the importance of having the right tools for your trade. They offer a quick leasing process, with decisions typically made within 48 hours of your application. This ensures that your pipe benders can be delivered and operational swiftly, enhancing your production efficiency and reducing downtime. 2. Increased Financial Flexibility Leasing pipe benders with CWB National Leasing boosts your buying power. It allows you to spread costs over manageable periodic payments rather than a significant initial purchase, freeing up capital for other vital business operations. The option to add extra features or accessories to your pipe benders for a small payment increase enables customization to meet specific project requirements. 3. Effective Cash Flow Management Manageable lease payments over the term mean your pipe benders start contributing to your business’s revenue while they're being paid off. This balanced approach helps maintain a healthy expense-to-revenue ratio, essential for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal fluctuations in income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing pipe benders can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can optimize your business’s tax position. Conclusion Choosing to lease pipe benders through CWB National Leasing is a strategic decision that equips your business with essential fabrication equipment while maintaining financial flexibility. It ensures access to high-quality pipe benders, vital for precise and efficient pipe fabrication, without the financial burden of a large upfront investment. This leasing approach enables enhanced operational efficiency, improved project quality, and increased profitability, helping your business to excel in its respective industry.

Advance Your Manufacturing Capabilities with Milling Machine Leasing from CWB National Leasing Transforming Your Production Processes with Flexible and Efficient Equipment Solutions In the manufacturing, metalworking, and engineering sectors, milling machines are indispensable for precise material shaping and fabrication. Leasing milling machines through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and practical solution for businesses seeking to enhance their production capabilities. Here’s how leasing milling machines can benefit your business: 1. Quick Access to Advanced Manufacturing Equipment CWB National Leasing understands the importance of maintaining an efficient production line. They offer a swift leasing process, typically providing decisions within 48 hours of application submission. This ensures that your milling machines can be delivered and operational quickly, minimizing downtime and enhancing your manufacturing efficiency. 2. Enhanced Financial Flexibility Leasing milling machines with CWB National Leasing boosts your buying power. It enables you to free up capital by opting for manageable periodic payments instead of a large upfront purchase. The option to add extra features or accessories to your milling machines for a small payment increase allows for customization to meet specific production requirements. 3. Effective Cash Flow Management Smaller lease payments over the term mean your milling machines start contributing to your business’s revenue while they're being paid off. This approach helps maintain a healthy balance between expenses and income, crucial for the financial stability and growth of your business. 4. Customizable Payment Plans CWB National Leasing offers various payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is especially beneficial for businesses with variable or seasonal income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing milling machines can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can positively impact your business’s tax position. Conclusion Opting to lease milling machines through CWB National Leasing is a strategic decision that equips your business with essential manufacturing equipment while maintaining financial agility. It ensures access to high-quality milling machines, vital for precise and efficient production, without the financial strain.

Revolutionizing Manufacturing with ALCiT's Cutting-Edge Solutions In the world of manufacturing, precision, efficiency, and safety reign supreme. At ALCiT, we understand that your industry's demands go far beyond the ordinary. Our commitment to security and innovation goes hand in hand with your mission to create, build, and deliver. Welcome to the future of manufacturing excellence. Security: Beyond Essential, a Lifeline Security isn't just a feature – it's a lifeline, especially in manufacturing where lives may depend on it. ALCiT infuses security into every design, ensuring that your operations remain impenetrable against threats. With us, your focus can stay on production, while we fortify your digital landscape. Customized Solutions for a Dynamic Industry Manufacturing's dynamic nature demands tailored solutions. ALCiT is here to guide you through the process. From selecting the right equipment for your current and future needs to delivering a complete turnkey solution, our expertise ensures your operations are seamless, efficient, and secure. Examples of Manufacturing Solutions Segregated Networks for SCADA Devices: Protecting your SCADA devices is paramount. ALCiT creates segregated networks that safeguard your industrial control systems from potential threats, ensuring operational continuity. Ruggedized Tablets and Barcoding Solutions: Streamline your operations with our ruggedized tablet-based barcoding solutions. Seamlessly integrate with your ERP system, optimizing your manufacturing processes. Wireless Deployment for Warehouses: Embrace wireless connectivity for your warehouses. ALCiT's solutions facilitate real-time data transfer, enhancing efficiency and ensuring your supply chain remains uninterrupted. Enclosed Racks for Outdoor Equipment: Equipment outside the office deserves robust protection. Our enclosed racks safeguard your machinery from harsh environments, ensuring reliability and longevity. Full Out-of-Band Management: Even in remote locations, your operations need management. ALCiT's full out-of-band management ensures that you're in control, regardless of location. On-Premise and Off-Premise Servers: Support your everyday needs with our versatile servers. Whether on-premise or off-premise, we provide the backbone for your operations, ensuring stability and scalability. Secure Today, Excel Tomorrow ALCiT's solutions are more than just tools – they're enablers of manufacturing excellence. Embrace a future where efficiency, precision, and security converge seamlessly. Empower your manufacturing operations with ALCiT's solutions.

Elevate Your Security with ALCiT's SonicWall Partnership In the ever-evolving realm of cybersecurity, one name stands tall: SonicWall. This multi-award-winning titan has carved a niche as one of the premier cybersecurity companies, protecting networks and emails with unmatched prowess. ALCiT proudly partners with SonicWall, bringing you a gateway to fortified security that leaves no vulnerabilities unchecked. SonicWall: Guardian of Digital Realms Recognized as a cybersecurity powerhouse, SonicWall's reputation is written in awards and innovation. As threats grow in complexity, SonicWall evolves in protection. ALCiT joins forces with SonicWall, offering a shield against threats that's unmatched in the industry. Network Protection Redefined Versatile Security Portfolio: SonicWall's arsenal is ever-expanding, offering a diverse suite of security solutions. Whether you have a single office or a sprawling network, SonicWall's options cater to your needs. Your Partner in Selection: With ALCiT's guidance, you'll find the perfect SonicWall solution that suits your unique requirements. We're not just service providers; we're architects of your security fortress. Seamless Deployment, No Upfront Cost: Embrace the future with ALCiT's Firewall as a Service. Wave goodbye to outdated and insecure firewalls. Embrace the power of a Next Generation Firewall, without the burden of hefty upfront costs. Fortify Your Security Today, Not Tomorrow Why wait for threats to strike? With ALCiT's SonicWall partnership, your security's future starts now. Embrace the power of next-level protection and thrive in a landscape where your network and emails remain impervious to attacks. Secure Your Future Today ALCiT's partnership with SonicWall isn't just a collaboration; it's a commitment to your security's evolution.

InWaTec Combined: Streamlining Wellbore Maintenance with Drive Down Bailer Services In the intricate world of well servicing, the importance of maintaining a clear and clean wellbore cannot be overstated. At InWaTec Combined, we understand the complexities of bailing operations, whether they are conducted on drilling rigs, during workover operations, or within production wells. That's why we are proud to offer our specialized Drive Down Bailer running services, providing a robust solution for the collection of solids and the overall cleansing of the wellbore environment, both onshore and offshore. Defining Bailing Operations with Excellence Bailing operations are essential for the upkeep of wellbore integrity, allowing for the efficient removal of debris that could potentially hinder well performance. InWaTec Combined's Drive Down Bailer services are meticulously designed to handle these operations with precision and reliability, ensuring that your wellbore remains free from obstructions that could impede operational success. Adaptable Services for Diverse Settings Our Drive Down Bailer services are versatile and adaptable, capable of being deployed in a variety of settings. Whether it’s the challenging offshore environment with its unique logistical demands or the accessibility of onshore operations, our services are tailored to meet the needs of the specific operation, ensuring the same high standards of quality and efficiency are maintained across all environments. Innovative Approach to Wellbore Cleaning InWaTec Combined utilizes the latest in bailing technology, equipping our Drive Down Bailers with the capacity to effectively collect and remove solids from the wellbore. Our approach to wellbore cleaning prioritizes not only the immediate removal of debris but also the long-term maintenance of the wellbore, ensuring continued productivity and reduced risk of downtime. Safety and Environmental Responsibility Recognizing the importance of safety and environmental stewardship, InWaTec Combined conducts all bailing operations with these as core priorities. Our Drive Down Bailer services are executed with the utmost attention to safety protocols, ensuring the well-being of all personnel involved, while also maintaining the integrity of the surrounding environment. InWaTec Combined: Your Trusted Partner in Well Servicing By choosing InWaTec Combined for your bailing needs, you are selecting a partner committed to delivering excellence. Our Drive Down Bailer running services are a reflection of our dedication to providing top-tier well servicing solutions that not only meet but exceed industry standards. We are dedicated to ensuring that your operations are carried out efficiently, safely, and with the highest degree of professionalism. Conclusion: Clearing the Path to Operational Excellence In conclusion, InWaTec Combined's Drive Down Bailer services offer a strategic advantage in well servicing operations. Our commitment to precision, adaptability, and safety ensures that we provide solutions that clear the path to operational excellence. Trust in the expertise and dedication of InWaTec Combined to keep your wellbore in optimal condition, ensuring the continued success and productivity of your well operations.

Accelerate Your Fabrication Success with Welder Leasing from CWB National Leasing Empowering Your Business with State-of-the-Art Welding Solutions In industries such as manufacturing, construction, automotive repair, and metalworking, high-quality welders are essential for efficient, precise, and reliable fabrication work. Leasing welders through Canadian Western Bank (CWB) National Leasing presents a flexible, cost-effective, and intelligent solution for businesses seeking to enhance their welding capabilities. Here’s how leasing welders can boost your business operations: 1. Fast Access to Advanced Welding Equipment CWB National Leasing understands the critical role of welding equipment in your operations. They offer a swift leasing process, typically notifying your equipment dealer about payment within 48 hours of approval. This rapid service means your welders can be delivered and operational quickly, enhancing your fabrication efficiency and reducing project turnaround times. 2. Enhanced Financial Flexibility Leasing welders with CWB National Leasing enhances your buying power. It allows you to allocate resources efficiently by opting for periodic payments over a significant upfront purchase. The flexibility to add extra features or accessories to your welders for a small payment increase enables customization to meet specific operational needs. 3. Effective Cash Flow Management Manageable lease payments over the term mean your welders start contributing to your business’s revenue while they're still being paid off. This strategy helps maintain a healthy balance between expenses and income, crucial for long-term business stability and growth. 4. Customizable Payment Plans CWB National Leasing offers a range of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal fluctuations in income, ensuring that payments are practical and aligned with your financial situation. 5. Potential Tax Benefits Leasing welders can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can positively impact your business’s tax position. Conclusion Opting to lease welders through CWB National Leasing is a strategic decision that equips your business with essential welding tools while maintaining financial agility. It ensures access to the latest welding technology, vital for high-quality fabrication, without the financial burden of a large upfront investment. This leasing approach enables enhanced operational efficiency, improved production quality, and increased profitability, helping your business excel in the competitive fabrication and manufacturing industries.

Storm Choke® H safety valves are ambient-type, wireline retrievable valves that are normally closed and precharged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge, as a result of a rupture in the flowline or surface equipment, the dome pressure and valve spring are designed to close the valve, shutting in the well. The H valve is used in wells producing large volumes of abrasive fluids. Its large bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal (MTM) ball and seat is used as the primary closure mechanism. The H valve is ideal for protecting wells with declining bottomhole pressure because this valve is tubing pressure sensitive instead of velocity sensitive. To reopen, the valve pressure must be fully equalized either by applying pressure in the tubing from the surface or by running a prong to allow equalization from below. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells producing large volumes of abrasive fluids » Wells with declining bottomhole pressure » Wells with no provisions for surface-controlled valves Features » Large bore not restricted by a flow bean » MTM ball and seat » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

The DepthStar® tubing-retrievable safety valve (TRSV) is a revolutionary concept in the realm of surface controlled subsurface safety valves. Unlike other TRSVs, the DepthStar valve functions completely independent of well pressure; therefore, it is able to operate at consistently low hydraulic pressures, making it an ideal solution for deepwater completions. Previously, solutions to wellbore isolation of the piston required additional seals and/or gas-charged chambers where their reliability is heavily dependent on elastomeric seals and the permanent, long-term containment of a dome charge. The DepthStar valve, through the use of a revolutionary magnetic coupler, allows for positioning the hydraulic actuator completely out of the tubing wellbore. By repositioning the hydraulic actuator outside the tubing wellbore, the DepthStar valve becomes the world’s first 100% metal-to-metal (MTM) safety valve that contains no moving seals within the tubing wellbore. This reduction in seals combined with an intrinsically simple design makes the DepthStar TRSV inherently reliable. The DepthStar TRSV operates with a low operating pressure, making it an ideal solution for deep-set applications. Features » No moving seals exposed to the tubing wellbore » 100% MTM sealing within the tubing wellbore » Less than 5,000-psi maximum valve opening capability regardless of setting depth or pressure » Minimized number of body connections » Proven MTM, non-elastomer hydraulic actuator » Isolated flow tube *information referenced from supplier catalog.

Unleash the Power of Versatility with the Stickwelder 162 D! At Canaweld, we understand the diverse welding needs of the construction, oil & gas industries, and more. That's why we are thrilled to introduce the Stickwelder 162 D - a welding marvel that offers high-quality performance across a wide range of metals and thicknesses, ensuring impeccable results in every project. Portable Powerhouse The Stickwelder 162 D is designed to be your reliable companion, offering portability, power, and versatility in one compact unit. Whether you require Stick Welding or TIG welding with a lift start, this welding machine rises to the occasion, delivering consistent and exceptional welds. Safety and Efficiency Combined We understand the challenges of adverse conditions, which is why we've equipped the Stickwelder 162 D with an extra function that reduces power draw, ensuring safer and more efficient performance in challenging environments. When precision matters, trust the Stickwelder 162 D to get the job done. Ideal for Light to Medium Duty Projects From construction sites to oil & gas projects, the Stickwelder 162 D is the ideal choice for light to medium-duty projects, providing reliability and flexibility in all weather conditions. Its lightweight construction and convenient carrying belt make transportation a breeze, ensuring you can take this welding powerhouse wherever the job demands. Weld with Confidence Enjoy excellent arc characteristics with the most common rods up to 5/32 inches, providing you with the confidence to tackle a variety of welding tasks. Experience low power consumption, making it energy-efficient and eco-friendly. Ready for the Outdoors The Stickwelder 162 D is designed to work outdoors with the appropriate power generator, offering you the freedom to take on welding projects wherever they may be. It's fan-cooled and thermally protected, ensuring durability and performance even in demanding conditions. The Canaweld Promise With Canaweld's Stickwelder 162 D, you can rely on the Canaweld promise of excellence and durability. Our comprehensive 3-year warranty further solidifies our commitment to quality and customer satisfaction. Get the job done right with the Stickwelder 162 D. Embrace the power of versatility, portability, and efficiency, and elevate your welding experience with Canaweld. Whether you're on a construction site or in the oil & gas industry, trust the Stickwelder 162 D to deliver flawless welds. Choose the welding machine designed with your needs in mind - the Stickwelder 162 D. Welding Perfected!

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Introducing ID Oiltools' Drill Collar Severing Tools - the reliable and safe solution for Pipe Recovery Operations. Our Drill Collar Severing Tools utilize Explosive Bridge-Wires to simultaneously detonate columns, creating a shock wave collision that severs the tubular with precision. Our tool provides a quick and effective solution to sever heavyweight drill pipe and drill collars, and is designed to conform to API RP-67 for maximum safety. With air shippable detonators and hardware shipped separately, our Drill Collar Severing Tools are the ultimate in convenience and efficiency. Our patented Explosive Bridge-Wire Detonators increase the precision of the colliding shock-waves for maximum performance, making it the tool of choice for stuck pipe or plug and abandonment (P & A) operations. Choose the tool with the largest possible diameter capable of running in the stuck pipe for maximum results. Tension should be applied to the tubing prior to detonation of the Severing Tool to assist in the removal of stuck tubulars. Trust ID Oiltools to provide the safe, efficient, and reliable solution for all your Pipe Recovery Operations.

Superior Cleaning Power Our 4-liter EnviroBlu cleaning solution is engineered to tackle the toughest industrial grime, delivering unparalleled cleaning performance. Perfect for maintaining clean, safe, and efficient workplaces, EnviroBlu is your go-to solution for industrial environments. Eco-Friendly Formula Committed to sustainability, EnviroBlu's eco-friendly formula ensures that while you achieve peak cleaning efficiency, the impact on the environment is minimized. Ideal for industries aiming to maintain environmental responsibility alongside operational excellence. Diverse Uses Whether you're cleaning heavy machinery, warehouse floors, or complex equipment, EnviroBlu's potent formulation is designed to handle diverse industrial cleaning needs. This 4-liter size offers convenience and sufficient volume for extensive cleaning tasks, ensuring thorough coverage and effectiveness. Environmental EnviroBlu provides top-notch, environmentally safe cleaning and degreasing products. Emphasizing their commitment to sustainability, all EnviroBlu products are water-based, non-toxic, and phosphate-free. This makes them not only safe for various industrial, commercial, and residential applications but also gentle on the environment. The formulation is designed to deliver efficient cleaning without compromising ecological integrity. EnviroBlu's ongoing mission is to help industries reduce their carbon footprint and environmental impact through innovative cleaning solutions, aligning with initiatives like the Green Marine program to further environmental excellence. Boost your industrial cleaning standards with EnviroBlu. Available in a 4-liter package, it's ready to tackle your most challenging cleaning jobs.

Unlock Local Currency Access Anywhere with Dunbridge Financial's Personal Services Imagine traveling to a new country and seamlessly accessing the local currency as if you already had a local bank account. With Dunbridge Financial's Personal Services, this dream becomes a reality. We understand the importance of having local currency at your fingertips when you need it, and our innovative solutions are designed to make your financial experiences hassle-free and empowering. Access Local Currency Anywhere You Go Traveling to a new country is an adventure, but managing your finances in a foreign land can be a challenge. At Dunbridge Financial, we believe that you should have the freedom to access local currency effortlessly. Our Personal Services provide you with the tools you need to make your travel experiences smooth and enjoyable. Personal Services for Your Peace of Mind At Dunbridge Financial, we take pride in offering comprehensive Personal Services that cater to your specific financial needs. Here's why our customers choose us: 1. Live Rates with No Hidden Fees Transparency is at the heart of our services. When you choose Dunbridge Financial, you won't encounter any hidden fees. What you see is what you get - access our live exchange rates and be confident that you're getting the most value for your money. 2. Security is Our Priority Your financial security is paramount to us. We partner with payment service providers who adhere to ISO27001 compliance, ensuring that your funds and data are managed safely and securely. Enjoy peace of mind knowing that your financial transactions are in trustworthy hands. 3. Easy to Use, Easy to Save Managing your international transactions should be effortless. With Dunbridge Financial, it is as simple as it gets. Sending money to over 100 countries is just a few clicks away. Select your destination, choose the recipient, lock in your exchange rate, and you're done! Saving time and money has never been easier. Why Choose Dunbridge Financial? We are more than just a financial service provider - we are your reliable partner in managing your personal finances. When you choose Dunbridge Financial, you gain access to: • Cutting-edge technology for smooth and efficient transactions • Expert guidance from our dedicated team, ensuring your needs are met • Secure and compliant processes that prioritize your financial well-being Join Us Today and Empower Your Financial Freedom Don't let financial limitations hinder your travel experiences. Join Dunbridge Financial today and experience a world of ease, convenience, and security. Whether you need local currency while traveling or making international money transfers, we are here to make your financial journey a breeze. Empower your financial freedom with Dunbridge Financial. Sign up now and unlock a seamless, worry-free financial experience. Access local currency anywhere you go and embrace a world of limitless possibilities.

Stay Committed to Your Home Country with Dunbridge Financial's Personal Services: Simplify Tax Payments Life can take us to different corners of the world, but it's essential to stay connected to our home country and fulfill our commitments, especially when it comes to tax payments. At Dunbridge Financial, we understand the importance of keeping your home country obligations up to date, and that's why we offer Personal Services tailored to your specific needs, including hassle-free tax payments. Ensure Your Home Country Commitments with Ease Paying taxes to your home country while living abroad can be a daunting task. But with Dunbridge Financial, it's a breeze. Our streamlined services enable you to fulfill your tax responsibilities promptly and securely, no matter where you are in the world. Stay committed to your financial duties and gain peace of mind knowing that your tax payments are in safe hands. Experience Our Personal Services At Dunbridge Financial, we believe in providing services that make managing your personal finances simple and stress-free. Here's what sets us apart: 1. Live Rates with No Hidden Fees Transparency is the foundation of our services. When you choose Dunbridge Financial, you won't encounter any hidden fees. What you see is what you get - access our live exchange rates and ensure that you're making the most out of your money. 2. Security is Our Priority The security of your funds and data is of utmost importance to us. We partner with payment service providers who adhere to ISO27001 compliance, ensuring that your finances are managed with the highest levels of safety and security. Enjoy peace of mind knowing that your financial transactions are protected. 3. Easy to Use, Easy to Save Managing your finances shouldn't be complicated. With Dunbridge Financial, it's as simple as can be. Sending money to over 100 countries is just a few clicks away. Select your destination, choose the recipient, lock in your exchange rate, and you're done! Saving time and money has never been easier. Why Choose Dunbridge Financial? We are more than just a financial service provider - we are your trusted partner in managing your personal finances. When you choose Dunbridge Financial, you gain access to: • Cutting-edge technology for seamless and efficient transactions • Expert guidance from our dedicated team, ensuring your needs are met • Secure and compliant processes that prioritize your financial well-being Join Us Today and Simplify Your Tax Payments Don't let tax payments be a source of stress. Join Dunbridge Financial today and experience a world of ease, convenience, and security when it comes to managing your personal finances. Whether you're making tax payments to your home country or sending money to loved ones abroad, we are here to make your financial journey a breeze. Simplify your tax payments with Dunbridge Financial. Sign up now and embrace a worry-free, well-connected financial experience.

Designed for telecom applications; excellent ‘floor space savers’ for marine and vehicle applications The deep cycle AGM telecom series has been designed for use in telecom systems. With front access terminals and small footprint, the batteries are ideal for racked systems. Similarly, these batteries can help solve limited floor space and access problems on board boats and vehicles. AGM technology AGM stands for Absorbent Glass Mat. In these batteries the electrolyte is absorbed into a glass-fibre mat between the plates by capillary action. Low self-discharge Because of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The selfdischarge doubles for every increase in temperature by 10°C. Low internal resistance Accepts very high charge and discharge rates. High cyclic life capability More than 500 cycles at 50% depth of discharge. *data sourced from manufacturer.